Javascript Menu by

Cast Iron Fireplace Radiator Left Motor

Item Code: 5MF-44100L

Availability: Available, Ships in 5 business days.

List Price: $749.98

Special Price: 499.00 Free Shipping*

You Save : $250.98 (33.46%)

Regular Price: $499.95

Special Price: $499.00 Free Shipping*


The Fireplace radiator is a quality appliance designed to give you years of trouble-free service. Set-up and operation is quite simple.

  • Cuts your Heating bill
  • Pays for Itself
  • Saves Energy
  • 45,000 BTU's Output
  • Keeps the beauty of your Fireplace
  • Can be used with or without Glass Doors

Here's how it works:

If you're concerned about skyrocketing fuel costs, or the possibility of a fuel shortage, you'll find comfort in the Fireplace Radiator. It will cut your fuel bills and put money in your pocketbook. At the same time, make you less reliant on gas, oil or electricity to heat your home.

First, the fan draws in cool air from the floor. Then, the air moves through the plenum where it is heated. Finally, the heated air emerges from the front air diverter bar and spreads throughout the home.

This model has the motor on the left (looking at the fireplace) and can be used in either a masonry fireplace or a zero-clearance (pre-fab) fireplace.

Right hand motor model available.

Editors Note:  The Fireplace Radiator is one of the best hearth heaters available.  The quality is high, it accommodates most fireplaces, the fan is stronger than all other hearth heaters we carry and it sits outside the fireplace allowing for more firewood and less heat on the fan motor.  Works with or without fireplace doors.  The hot air blows out at 3 degrees under the maximum allowable at 18" from the face of the fireplace. We recommend this unit highly.

Additional Information
  • 45,000 BTU output.
  • 6' Power cord.
  • Largest fan compared to any other grate heater we offer 50-180 cfm.
  • Heavy-duty cast iron construction of components inside the fireplace make for a long life.
  • Built-in fire back (the heat chamber) radiates heat back into the room.
  • Left or right hand motor models available.
  • Easy assembly and operation.
  • 5 Year Warranty on cast iron and sheet metal parts.
  • 1 Year Warranty on electrical.
  • Minimum Requirements:  Fireplace width from 19" to 51" and depth of 16 1/2" or more.
  • Fireback (hollow plenum) measures 11" High x 18 Wide
  • Tubes measure: 10.5" inside width and 18" outside width
Additional Information

The Fireplace Radiator is a new twist on a time tested product. Fireplace hearth heaters have proven highly effective over the years supplying heat from wood and coal burning fireplaces. The fireplace radiator has been carefully designed with the user in mind. The tubes are adjustable to fit any fireplace depth from 16 1/2" up. The plenum "heat chamber" is adjustable in height by using the supplied bolts to raise it up for dropped firebox installations. The front air diverter and riser bar is expandable from 36" to 52" wide and can be used with fireplace doors (you will need to raise your doors approximately 1 1/8").

The UL listed variable speed motor moves HOT AIR at anywhere from 50 to 180 cubic feet per minute depending on the setting and customer preference with an output of up to 45,000 BTU's +. The motor may be positioned on either side of the fireplace.

The cast iron hollow heat chamber acts not only as a storage area for super heated air but also as a fire back reflecting radiant heat back into your living area. The hollow cast iron tubing heats air as it passes through and allows air to move thru the heat chamber. Heavy duty cast iron construction ensures durability and a long life while its 5 year limited warranty gives you piece of mind. Holding multiple patents, you won't find any other hearth heater like it. The Fireplace Radiator can be used in masonry or zero clearance fireplaces with a firebox having a depth no less than 16 1/2" and a width of no less than 19" and no more than 51".

Owners Manual

Brand WoodEze
Model 53768
Shipping Weight (lbs) 67.0000
Actual Weight (lbs) 67
Product Type Blower Motors
Material Cast Iron
Grate Width 18'' to 20'', 21'' to 24'', 26'' to 28'', 30'' to 32'', 33'' and Over
Grate Type Cast Iron Grates
  • 5 Year Warranty on cast iron and sheet metal parts.
  • 1 Year Warranty on electrical.

Our Warranty, Return & Exchange Policy

Visit our No-Risk Warranty

Visit our Automated Returns, and we'll guide you through the quick and easy return and exchange process.

Estimate Shipping

Customer Reviews

Posted: 3/28/13

Reviewer: Al

  • Value:
  • Quality:
  • Overall:

Good product. One minor quality issue

Overall a nice less expensive alternative to fireplace inserts. Vendor had motor placement incorrect on web site which was replaced at no charge. Manufacturer had clamp mark damage to sheet metal. Also replaced at no charge. Tube inserts would be better if more snug and less use of fireplace morter.
Variable speed motor is nice for noise reduction. Throws out nice hot air after all was done and sealed.

Posted: 1/9/11


  • Overall:
  • Value:
  • Quality:

Produces a lot of heat. Using a medium setting, the noise from the fan was tolerable. During a power outage I was able to run 5 hours with a portable battery. Improvements would be quieter fan, and lower wattage

Posted: 12/23/09

Reviewer: jerald j. whittle

  • Overall:
  • Value:
  • Quality:

works great, keeps room the warm toasty

Posted: 11/23/09

Reviewer: Robert Sack

  • Overall:
  • Value:
  • Quality:

Solid construction and well designed. It definitely pumps a lot of heat into the room. The motor is loud which kept me from rating excellent

Posted: 10/14/08

Reviewer: C. B.

  • Overall:
  • Value:
  • Quality:

I love the fact that I can shut my glass doors and still get all the heat from the unit. Most of the others require you to leave your doors open to let the blower work. I wish that the motor was just a little less noisy. It rattles a little. All in all, I have recommended this unit to quite a few people already!

Posted: 3/6/08

Reviewer: Donna Meinze

  • Overall:
  • Value:
  • Quality:

The only thing I would do differently
with it would be to design in such a
way that would allow extension on each
end to fit opening. With my fireplace doors being an issue I had to have a welder friend to make a little metal piece about 3 inches to fill the small opening that was left on right side after installation. Had it not been for the doors it would have fit fine. Other than that
I am thrilled with the product and the amount of heat it throws into the room.
It along with my new doors have enabled me to burn my fireplace anytime
I want without fear of electricity going up the chimney. I'm thrilled!!!

Questions on Cast Iron Fireplace Radiator Left Motor

No questions asked yet

Ask Your Own Question