Cast Iron Fireplace Radiator Right Motor

Item Code: 5MF-44100R

Availability: In Stock, Only 1 left, Ships in 1 to 2 business days.

List Price: $749.98

Special Price: 499.00 Free Shipping*

You Save : $250.98 (33.46%)

Regular Price: $499.95

Special Price: $499.00 Free Shipping*

$499.00
Details

The Fireplace radiator is a quality appliance designed to give you years of trouble-free service. Set-up and operation is quite simple.

  • Cuts your Heating bill
  • Pays for Itself
  • Saves Energy
  • 45,000 BTU's Output
  • Keeps the beauty of your Fireplace
  • Can be used with or without Glass Doors

Here's how it works:

If you're concerned about skyrocketing fuel costs, or the possibility of a fuel shortage, you'll find comfort in the Fireplace Radiator. It will cut your fuel bills and put money in your pocketbook. At the same time, make you less reliant on gas, oil or electricity to heat your home.

First, the fan draws in cool air from the floor. Then, the air moves through the plenum where it is heated. Finally, the heated air emerges from the front air diverter bar and spreads throughout the home.

This model has the motor on the right (looking at the fireplace) and can be used in either a masonry fireplace or a zero-clearance (pre-fab) fireplace.

Left hand motor model available.

Editors Note:  The Fireplace Radiator is one of the best hearth heaters available. The quality is high, it accommodates most fireplaces, the fan is stronger than all other hearth heaters we carry and it sits outside the fireplace allowing for more firewood and less heat on the fan motor. Works with or without fireplace doors. The hot air blows out at 3 degrees under the maximum allowable at 18" from the face of the fireplace. We recommend this unit highly.

Additional Information
Specifications
  • 45,000 BTU output.
  • 6' Power cord.
  • Largest fan compared to any other grate heater we offer 50-180 cfm.
  • Heavy-duty cast iron construction of components inside the fireplace make for a long life.
  • Built-in fire back (the heat chamber) radiates heat back into the room.
  • Left or right hand motor models available.
  • Easy assembly and operation.
  • 5 Year Warranty on cast iron and sheet metal parts.
  • 1 Year Warranty on electrical.
  • Minimum Requirements: Fireplace width from 19" to 51" and depth of 16 1/2" or more.
  • Fireback (hollow plenum) measures 11" High x 18 Wide
  • Tubes measure: 10.5" inside width and 18" outside width
Additional Information

The Fireplace Radiator is a new twist on a time tested product. Fireplace hearth heaters have proven highly effective over the years supplying heat from wood and coal burning fireplaces. The fireplace radiator has been carefully designed with the user in mind. The tubes are adjustable to fit any fireplace depth from 16 1/2" up. The plenum "heat chamber" is adjustable in height by using the supplied bolts to raise it up for dropped firebox installations. The front air diverter and riser bar is expandable from 36" to 52" wide and can be used with fireplace doors (you will need to raise your doors approximately 1 1/8").

The UL listed variable speed motor moves HOT AIR at anywhere from 50 to 180 cubic feet per minute depending on the setting and customer preference with an output of up to 45,000 BTU's +. The motor may be positioned on either side of the fireplace.

The cast iron hollow heat chamber acts not only as a storage area for super heated air but also as a fire back reflecting radiant heat back into your living area. The hollow cast iron tubing heats air as it passes through and allows air to move thru the heat chamber. Heavy duty cast iron construction ensures durability and a long life while its 5 year limited warranty gives you piece of mind. Holding multiple patents, you won't find any other hearth heater like it. The Fireplace Radiator can be used in masonry or zero clearance fireplaces with a firebox having a depth no less than 16 1/2" and a width of no less than 19" and no more than 51".

Owners Manual

Brand WoodEze
Model 55322
Shipping Weight (lbs) 67.0000
Actual Weight (lbs) 67
Product Type Blower Motors
Material Cast Iron
Grate Width 18'' to 20'', 21'' to 24'', 26'' to 28'', 30'' to 32'', 33'' and Over
Grate Type Cast Iron Grates
Warranty

5 Year Warranty on cast iron and sheet metal parts. -- 1 Year Warranty on electrical.



Our Warranty, Return & Exchange Policy

Visit our No-Risk Warranty

Visit our Automated Returns, and we'll guide you through the quick and easy return and exchange process.

Estimate Shipping

Customer Reviews

Posted: 1/4/2013

Reviewer: Mountain Maiden

  • Value:
  • Quality:
  • Overall:

Could not live without it

I've used this from September through May, daily, for six or seven years. I've had the motor repaired twice and it needs to be repaired again. I'm looking to replace the motor. It gives off a lot of heat, but it is noisy. It will not heat a 500 square foot room on it's own, but it supplements the heat and allows me to set the thermostat lower and save on heating costs.

Posted: 12/23/2012

Reviewer: Billaban

  • Overall:
  • Value:
  • Quality:

Good while it lasted

I've had mine for probably 8 years. Blower motor apparently died yesterday. Just about to take it apart and see what my options are. Ended up here since I thought I would nose around on the web first to see if getting parts is an option. Haven't found much yet. Yes, the blower is loud and at some settings it will even vibrate. I have been heating several rooms with this unit. With glass doors I can close it up, run a timer on the blower to shutoff in a few hours and go to sleep at night. Worked fine until yesterday. Probably will buy another one (if needed) unless I find something that looks superior.

Posted: 1/11/2012

Reviewer: Ray

  • Overall:
  • Value:
  • Quality:

I like the overall performance, its rather noisey on high, so I run mine at about medium speed so I feel I do not get the full benefit from the product that I could. It was easy to setup and install.If the motor were less noisey and less vibration on high speed would be a GREAT product. Overall I like mine.

Posted: 12/12/2011

Reviewer: Jeff

  • Overall:
  • Value:
  • Quality:

First, this fireplace heater really pumps out the heat - works great!
But, the casting is not precise and the blower is loud.
It took a few trips to my shop to clean up the cast iron so it would fit together but I still rated it above average because it works so well.
I had a local welder build a custom vertical funnel shaped grate to hold the wood against the radiator. It uses very little short cut wood in the back of the firebox to keep my 4000+ sq ft house above 70 degrees when its 35 outside by turning on the HVAC fan.
I also installed a fireplace crane for cooking with a dutch oven over the compact fire in the back of the firebox and there's still enough room in the front for a 12x16 grill over the cast iron tubes.
This fireplace radiator is great!

Posted: 12/18/2008

Reviewer: Kevin Dawson

  • Overall:
  • Value:
  • Quality:

the unit puts out a lot of heat, but the blower motor is very noisy

Questions on Cast Iron Fireplace Radiator Right Motor

Sort by Descending
  • From Vanadis Mitchell at 11/21/2012 12:30 AM
    • Good evening,

      I was checking to see if my order was shipped, and with a date of delivery. I noted that there has been a price decrease and was wondering if I am eligible for the new lower price?
    • Thank you for your question. Please contact us toll free at 866-667-8454 and one of our representatives can assist you with your questions.
    • Do you find this question helpful?  Yes  No

Ask Your Own Question