Make your fireplace more efficient with a Cozy Grate Heater by Heat-N-Glo. More than 40,000 BTU's of heat per hour can be produced with this heavy-duty fireplace grate heater. Easy to install, simply replace your old fireplace grate with the Cozy Grate Heater, plug in the 9' power cord and build a fire. Within minutes the firebox will reach 110 degrees and begin to blow heat from the thermostatically controlled blower. Once your firebox temperature reaches 90 degrees, the blower turns off automatically.
The versatile unit can be used with or without a glass door. If used with a glass door, the door sits on top of the bar and would be elevated 1 3/8" high. The grate measures 8" high while the log basket measures 7 1/2" deep. Designed for masonry fireplaces, not intended for zero-clearance fireplaces.
Note: The Cozy Grate heater should run on high for 10-15 minutes, on initial start up. This will add longevity to the life of the motor.
In the case of a power outage you will need to remove the unit from your fireplace before lighting a fire.
- 40,000+ BTU's of Heat Per Hour
- 100 CFM Blower (variable speed)
- Rheostat and Thermostat Controlled
- Heavy 12 Gauge Steel Tubing Guaranteed 3 Years
- Turns On Automatically at 110 Degrees and Off at 90 Degrees
- All Electrical Components U.L. Approved & 1 Year Warranty
- The Motor is Encased and Insulated to Keep it Protected From Heat
View the brochure.
Click here for Replacement Parts.
Note: Pictured with optional Brass Trim Bar. All units have a 29 1/4" wide x 2" deep front rail and include black extenders that provide a maximum front rail width of 51 1/4". Your glass door (if applicable) sits on top of the front rail and is elevated 1 3/8".