Burner Components

You can light your gas log set by match, the turn of a knob, the flick of a wall switch, the use of a thermostat, or by remote control. Once you decide how you would like to operate your set you can determine what type of control valve you need.

Match Lighting: You can use a match or lighter coupled with the use of a manual on/off valve for ignition. This is the most basic method of operation for your gas log set and is not approved for LP (propane) gas. Note: Before considering this type of operation check your local codes as it may not be approved for NG in your area either.

Safety Pilot Control: The safety pilot control can be used with NG (natural gas) and is mandatory for LP (propane gas). The safety pilot control offers operation at the turn of a knob. The valve sits inside the fireplace next to the gas log set. You will use a match or lighter to light the pilot originally and then after that you simply turn the knob on the valve to operate your log set.

Millivolt Valve: A millivolt valve gives you the option of using a wall switch (included with most valves and requires installation), optional thermostat, or optional remote control. When selecting a millivolt valve for use with LP gas (propane) you will need to select a LP conversion kit unless otherwise specified.

Also see our Gas Log Control Valve Section

Note: Be sure to check your local codes before purchasing a valve type to ensure proper selection.