In today's air tight homes, even the best properly installed equipment can fail to operate as designed if we neglect the basics. Wood or gas, vented or non-vented, an air starved appliance will not perform up to standards. Dealing with indoor air quality issues is no longer a choice, it is essential for the safety of your home.
Whether to satisfy the requirements for a non-vented gas appliance or to provide makeup air for a wood stove, this ventilator offers a professional solution to one of the most basic hearth problems. This is simple to use and installs easily. Made of tough paintable ABS plastic, this ventilator requires no electricity to operate. A four-inch hole in the wall is required to utilize this ventilator. It's as easy as installing a dryer vent and you will know you've satisfied your hearth needs.
- Interior Cover 5.9" high x 5.9" wide x 1 7/8" deep
- Exterior Cover 5 1/2" high x 5 1/2" wide
Requires a 4" diameter hole through the wall, extension tube will extend to 14 1/4" maximum length.Note: This item is made in the USA.
View the Condar ASV Installation Instructions