This Fresh Air Adapter is for use with the Osburn 2300 wood burning stove to draw in fresh combustion air. That fresh air source can be a hole in the floor near the rear of the stove - terminating into a ventilated crawl space, or a hole in the wall behind the stove. Flexible pipe attaches to the inlet at the rear of the stove and to the outside source to supply combustion air to the fire. Kit includes oval outlet plate, restriction plate, and two screws
For a mobile home installation the stove must be connected to an outside source of combustion air. A 3" inside diameter metallic pipe, either flexible or rigid, may be attached to the inlet at the stove's rear. A rodent guard (minimum 1/4" wire mesh) must be used at the terminus. All connections must be secured and airtight by either using the appropriately sized hose clamp and/or UL-181-AP foil tape.
Combustion chamber (welds only), castings, and convector airmate: Lifetime
Plating (defective manufacture)- subject to limitations: Lifetime
Secondary air tubes, vermiculite baffle, C-Cast baffle and handle assembly: 5 Year
Stainless steel baffle and parts: 5 Year
Carbon steel baffle and parts: 2 Year
Blowers, thermal switches, rheostat, and other controls: 2 Year
Paint (peeling), gaskets, insulation, and ceramic glass (thermal breakage only-pictures required): 1 Year
Questions? Call Toll-free 866-667-8454 All Orders Processed on Secure Servers
Hours: 9AM to 7PM Mon-Fri - Saturdays 9AM to 4PM Eastern Time Zone
Call Toll Free 866-NORTHLINE (866-667-8454)
Outside US call 989-821-7040
Fax 989-821-7203
All Orders Processed on Secure Servers
