Make your fireplace more efficient with a Cozy Grate Heater by Heat-N-Glo. More than 40,000 BTU's of heat per hour can be produced with this heavy-duty fireplace grate heater. Easy to install, simply replace your old fireplace grate with the Cozy Grate Heater, plug in the 9' power cord and build a fire. Within minutes the firebox will reach 110 degrees and begin to blow heat from the thermostatically controlled blower. Once your firebox temperature reaches 90 degrees, the blower turns off automatically.
The versatile unit can be used with or without a glass door. If used with a glass door, the door sits on top of the bar and would be elevated 1 3/8" high. The grate measures 8" high while the log basket measures 7 1/2" deep. Designed for masonry fireplaces, not intended for zero-clearance fireplaces.
Note: The Cozy Grate heater should run on high for 10-15 minutes, on initial start up. This will add longevity to the life of the motor.
Features:
40,000+ BTU's of Heat Per Hour
100 CFM Blower (variable speed)
Rheostat and Thermostat Controlled
Heavy 12 Gauge Steel Tubing Guaranteed 3 Years
Turns On Automatically at 110 Degrees and Off at 90 Degrees
All Electrical Components U.L. Approved & 1 Year Warranty
The Motor is Encased and Insulated to Keep it Protected From Heat
Note: Pictured with optional Brass Trim Bar. All units have a 29 1/4" wide x 2" deep front rail and include black extenders that provide a maximum front rail width of 51 1/4". Your glass door (if applicable) sits on top of the front rail and is elevated 1 3/8".
Fits a Masonry Fireplace Opening: 29 1/4" Wide to 51 1/4" Wide and 20" Deep
Heavy 12 Gauge Steel Tubing Guaranteed 3 Years
All Electrical Components U.L. Approved & 1 Year Warranty
Item Weight: 55.00 LB
Model: TR-20
Oiling a Cozy Grate Heater
On the side of the blower box, bend back the heat shield so you can access the two screws on the back. There is also one screw on the front side of the cover. ALL must come out. Inside, there are two nuts, these hold the motor to the motor housing. Remove the nuts. The fan blades will also come out with the motor so you can clean them as well. There will be two little oil holes, one on each end of the motor.You can use any type of light machine oil or 3-in-1.
All Electrical Components U.L. Approved & 1 Year Warranty
Steel Tubing has a 3 Year Warranty
I love my COZY GRATE !!!! It heats the entire 2200 square foot house... I am using 1/2 the wood and getting double the heat output...
I am very happy with the product so far. It was easy to install and the blower works well.
Excellent product and we use it every night. We received ahead of schedule. Thank you so much for your great customer service!!!
This thing is AWESOME! First of all, Northline Express shipped the Cozy Grate Heater in about 3 days. Installation took about 30 minutes TOTAL. The hardest part was cutting the left and right extension pieces to fit the exisitng width of the glass doors.
Operation is simple. Plug it in and forget about it! I built my first fire on the grate, and as expected, had a little smoke coming out of the unit for the first few minutes while it burned off the lubrication and stuff from manufacturing. The blower kicked on after about 5-10 minutes after the fire got going. Man was it blowing nice! Very quiet for the amount of air it moves.
The only issue I had was that the brick and wood floor just in front of the exit vent of the blower got VERY hot. I fxed this by jamming a piece of metal flashing under the heater and bending it up slightly so that the air flows up and into the room instead of just across the floor.
I've been building fires practically every nigt since I got the blower. It heats the whole house, practically!
you were very helpful. We are telling friends how nice and helpful you were.
Questions? Call Toll-free 866-667-8454 All Orders Processed on Secure Servers
Hours: 9AM to 7PM Mon-Fri - Saturdays 9AM to 4PM Eastern Time Zone
Call Toll Free 866-NORTHLINE (866-667-8454)
Outside US call 989-821-7040
Fax 989-821-7203