Make your fireplace more efficient with a Cozy Grate Heater by Heat-N-Glo. More than 40,000 BTU's of heat per hour can be produced with this heavy-duty fireplace grate heater. Easy to install, simply replace your old fireplace grate with the Cozy Grate Heater, plug in the 9' power cord and build a fire. Within minutes the firebox will reach 110 degrees and begin to blow heat from the thermostatically controlled blower. Once your firebox temperature reaches 90 degrees, the blower turns off automatically.
The versatile unit can be used with or without a glass door. If used with a glass door, the door sits on top of the bar and would be elevated 1 3/8" high. The grate measures 8" high while the log basket measures 9 1/4" deep. Designed for masonry fireplaces, not intended for zero-clearance fireplaces.
Note: The Cozy Grate heater should run on high for 10-15 minutes, on initial start up. This will add longevity to the life of the motor.
Features:
40,000+ BTU's of Heat Per Hour
100 CFM Blower (variable speed)
Rheostat and Thermostat Controlled
Heavy 12 Gauge Steel Tubing Guaranteed 3 Years
Turns On Automatically at 110 Degrees and Off at 90 Degrees
All Electrical Components U.L. Approved & 1 Year Warranty
The Motor is Encased and Insulated to Keep it Protected From Heat
Note: Pictured with optional Brass Trim Bar. All units have a 29 1/4" wide x 2" deep front rail and include black extenders that provide a maximum front rail width of 51 1/4". Your glass door (if applicable) sits on top of the front rail and is elevated 1 3/8".
Fits a Masonry Fireplace Opening: 29 1/4" Wide to 51 1/4" Wide and 22" Deep
Heavy 12 Gauge Steel Tubing Guaranteed 3 Years
All Electrical Components U.L. Approved & 1 Year Warranty
Item Weight: 57.00 LB
Model: TR22
Oiling a Cozy Grate Heater
On the side of the blower box, bend back the heat shield so you can access the two screws on the back. There is also one screw on the front side of the cover. ALL must come out. Inside, there are two nuts, these hold the motor to the motor housing. Remove the nuts. The fan blades will also come out with the motor so you can clean them as well. There will be two little oil holes, one on each end of the motor.You can use any type of light machine oil or 3-in-1.
All Electrical Components U.L. Approved & 1 Year Warranty
Steel Tubing has a 3 Year Warranty
This is the second Cozy Grate Fireplace Heater I have owned. I had the first one for 12 years. The only reason I replaced it with a new one is the blower motor got loose on the motor shaft. We partially heat our house with this fireplace heater and use it a lot during the fall, winter & spring. After thousands of hours of wood burning, the steel never burned through. I was happy to find a new heater identical to my old one. This heater kept our 2000 Sq Ft home at 60 to 62 degrees when we were without utilities for 7 days due to an ice storm. We ran the heater blower motor with a small generator. The new Cozy Great Heater works great. Just like my old one .
Dusty Edwards, Little Rock, AR
Works great but the fan is a little too loud. Not sure anything can be done about that.
This product is awesome. It provides a lot of heat. We heat the main part of the house with it which is about 1000sq ft. We have to keep a small fire or it gets too hot. The motor and blower is a little louder than we had hoped but we are getting used to it.
Great Grate, Was delivered on time as promised. Only thing i find is that the fan can be a little noisy from time to time depending on what speed it is running, but i just trun the volume up on the tv and all is fine.
I bought the Grate Heater last fall, using the President's economic stimulus check on this fine American made product. It was easy to install, works GREAT, and has probably saved a bit of money on home heating oil! Don Provost Kinnelon, NJ
Questions? Call Toll-free 866-667-8454 All Orders Processed on Secure Servers
Hours: 9AM to 7PM Mon-Fri - Saturdays 9AM to 4PM Eastern Time Zone
Call Toll Free 866-NORTHLINE (866-667-8454)
Outside US call 989-821-7040
Fax 989-821-7203