Replacement filter for Blue Rhino SkeeterVac Mosquito Traps.
How to determine if the filter needs to be replaced:
The most effective way of determining when the filter should be changed is to visually inspect it or test it. A new or little used filter will be a bright brass color. A filter that is dirty and possibly clogged will have a dull and more of a bronze look.
To test the filter, simply disconnect the regulator hose where it connects to the engine. Remove the small filter (about the size of a small pencil eraser). Reconnect the regulator hose to the engine and attempt to start the engine. If the engine starts then shut it down. The filter needs to be replaced. This scenario is assuming that the engine would not start prior to removing the filter.
One replacement filter for SkeeterVac Mosquito Traps
Filter is located where the gas line meets with the engine.
Disconnect gas line from the engine (unscrew the nut).Once gas line is loose pull to disconnect.
Remove fuel filter by pulling out of the engine fitting.
Place clean fuel filter into the engine fitting (open end must face toward the gas line).
Reconnect the gas line to the engine fitting.
Reconnect the regulator to the cylinder.
Turn gas on at the cylinder. Perform a leak test check at the cylinder and engine connection to make sure everything is connected properly.
Questions? Call Toll-free 866-667-8454 All Orders Processed on Secure Servers
Hours: 9AM to 7PM Mon-Fri - Saturdays 9AM to 4PM Eastern Time Zone
Call Toll Free 866-NORTHLINE (866-667-8454)
Outside US call 989-821-7040
Fax 989-821-7203
All Orders Processed on Secure Servers
