Spa Solutions DeFoamer works to remove annoying foam buildup in any pool, spa, hot tub or ornamental fountain, leaving the water crystal clear in seconds. Foam builds because of lotions, oils, soaps, and other organic compounds left by usage that reacts with chemicals in the pool. DeFoamer's powerful formula removes foam quickly and can be used multiple times on especially heavy buildup without any negative reactions.
Pool Dose: 2 ounces per 5,000 gallons of water.
Spa or Hot Tub Dose: 1 teaspoon per 200 gallons of water.
Use 2 ounces of DeFoamer per 5,000 gallons of water to prevent and eliminate foaming in swimming pools. Use 1 teaspoon of this product per 200 gallons of spa or hot tub water to prevent and eliminate foaming in water. The amount of DeFoamer required depends on the conditions of the tub or pool and the amount of foam present. Repeat this dose as needed to control the foam. Once this product is introduces, the effect on the foam should be immediate. Large quantities may be required where tubs or pools have had additions of soaps or detergents.
Note: Use the minimum amount necessary to reduce foaming. Repeat if foam reappears at a later date. It is important to note that consistent and excessive foaming indicates water problems.