Enter your destination to get a shipping estimate.
I used the stove-state to upgrade an older woodstove that had a blower with a manual blower switch. No more blowing cold air if the stove goes out, and no worrying about forgeting to switch the blower on or off anymore.
Works great for other heat sources also
I live in an older house in "the city" and have steam radiators. This works great with a fan plugged in, facing the radiator, to move the hot air around rooms quickly and economically (no fan running when the heat isn't on).
I have an older wood stove with a mechanical thermostat to turn off the blower. This was a perfect and inexpensive solution.
This product is excellent solution for stoves that don't have a thermostatically controlled fan. It is easy and simple to install and use .Save electricity by only running fan when stove is up to temp. I run two woodstoves and will be purchasing another one of these for my second stove.
Got it hooked up the way I wanted it, and it works great... Thanks so much for this website-alot of companies did not have the correct item. Thanks again and have a great 2012!!!
Easy to install and works great...
Reviewer: Damon Redden
The hook up to the fan was real easy, the shipping was quick and ordering was easy.
Reviewer: David Callahan
Fast and efficient.
Thank you for quality service and a good product.
I am heating an old house with a very old wood cook stove. I have a couple of blowers hooked up to it that move a lot of air. they get left on after the stove gets cold and if I turn them on too soon they are blowing cold air. This switch is exactly what I needed and works very well. Should have done it 20 years ago. The waisted electricity would have paid for it loooooooooong ago.
Reviewer: Steve Brown
Very fast service and exactly the part I needed. Thankyou.
I bought two of these and mounted them on my gas fire place and gas chimenia to turn on fans to circulate the heat around the rooms.
It's great to have the blower shut off when the stove goes out. Waking up to the blower on blowing cold air was terrible. Works great now.
Use wood to heat my TV repair shop. I would unplug the fan at night when I went home. With the stovestat the fan comes on automatically and I get a lot more heat out of the stove without leaving the fan on all the time.
Good product. Easy to attach to stove with magnetic bracket. No wiring neccessary. The literature says for double wall stoves I have a Drolet stove a w/brick ining it has a special place to mount the stat., but I mounted it on side of the stove just where the brick starts. Single wall is the correct temp there , it's working great.
Reviewer: Whit Miller
Works great...easy to set up and turns on and off as expected.
Product works great, just plug it in, then plug the fan in and put the sendor on the back of the stove.
Used this product INSIDE a gas fireplace to turn cage fan on and off. Installed easily. Temp below sensor always below 90* so no heat concern. Used insulation and aluminum oxide tape for added thermal protection. Very pleased with outcome.
Reviewer: Harold Bowers
It does seem a little slow to finally click on but once its going it turns off at the right time and all is well.
Questions on SS-1 Stovestat
No questions asked yet