Enter your destination to get a shipping estimate.
6'' Round Medium-Duty (Poly) Chimney Brush 3/8" NPT
-
-
-
-
Yes No
Customer Reviews
Posted: 1/23/13
Reviewer: Robert
Excellent product
I originally had a hardware store chimney pipe and a Schaefer 6" stainless steel chimney brush which worked fine. I replaced the chimney pipe with Selkirk Safe-T-Pipe and the brush was too tight. I purchased the 6'' Pro-Sweep Medium Duty (Poly) Chimney Brush 34606 and it worked perfectly and eliminated potential scoring of my chimney pipe.
Posted: 10/16/12
Reviewer: tsax
it works
I had previously bought the regular (stiffer) brush, but couldn't get it into the chimney pipe from within my little wood stove. This brush is flexible enough to push into the pipe. It cleans just fine.
Posted: 3/21/11
Reviewer: john a. belser
the brush looks like it will work for our purposes. i wanted 3/8 threads which the box stated but when contacted was sent the adapter which will work fine. thanks for the prompt and excellent service.
Posted: 1/10/11
Reviewer: steve Harstrom
Fits exactly for the 6 pipe, does a good job.
You'll need a 3/8 to 1/4 inch adaptor to attach to the rods. We got one for a dollar at an Ace Hardware, just a 3/8 to 1/4 inch reducer, galvanized.
Posted: 12/9/10
Reviewer: Bill
This brush works perfectly in our metal chimney. I ran the brush up and down the chimney with a flexible rod. We had a pile of creosote in the wood fireplace stove. It is strong and will last many years. I do the cleaning once or twice every year.
Posted: 12/9/10
Reviewer: Geoff
Very sturdy, very effective tool.
Great value too.
Posted: 11/12/10
Reviewer: HIM
I was at first uncertain if the medium duty chimney brush was going to be sturdy enough to clean the metal pipe insert in my chimney. It worked great!!
Posted: 10/12/10
Reviewer:
The brush worked very well, as advertised.
However, I had to trim most of the bristles by ~ 1/16 about 1/8 total, as it would not fit in my SS chimney liner otherwise. I do not know if this was a brush issue or my chimney liner is a bit smaller than 6 diameter.
Net / net - the brush worked very well.
Posted: 4/15/10
Reviewer: Dan
Ordered the brush and rods. Every thing worked great. I would recommend this brush.
Posted: 2/22/10
Reviewer: john b
have allready used and work fine
Posted: 2/18/10
Reviewer: Frank
Great for 6 s/s insulated chimney liners.
Posted: 11/20/09
Reviewer: Eric
The brush worked great for cleaning my stainless steel liner without scratching it. Very fast shipping.
Posted: 10/25/09
Reviewer:
I have the thinner flex pipe sleeve inside my chimney and I was afraid it would tear with the steel brush. The poly brush worked great and caused zero damage.
Posted: 2/11/09
Reviewer: thomas bartiss
Good Quality material and very fast service. Thank You
Posted: 12/11/08
Reviewer: jim
Fast shipping. Great products.
Posted: 11/20/08
Reviewer: A.N.
Solid brush, did a great job at cleaning chimney.
Posted: 11/18/08
Reviewer:
Great option for 5.5 ss chimney liners. Easy to cut 1/4 off bristles all around with wire cutters.
Posted: 10/29/08
Reviewer: Del
I have used the brush, and it works great. I have a 5 1/2 stainless flue, so I had to get the 6 brush and cut it down a little. The brush seems very durable. It should last many years. It did a great job of cleaning the flue.
I also like Northline's fast service and reasonable shipping charges.
I will definitely buy from Northline again.
Posted: 10/27/08
Reviewer: Firefighterjake
Works great . . . I had read some reviews of various products where folks had to trim the brush to fit into the pipe i.e. the 6-inch brush wouldn't fit very well into the 6-inch pipe . . . but this was not the case . . . fit perfectly and swept well.
Posted: 9/25/08
Reviewer: Lisa
We have a flex pipe chimney, this brush worked great. We are really glad we ordered this brush.
Questions on 6'' Round Medium-Duty (Poly) Chimney Brush 3/8" NPT
No questions asked yet
Loading...