null

Menu

13'' x 13'' Lock-Top II Chimney Cap-Damper 3/4'' Mesh

13'' x 13'' Lock-Top II Chimney Cap-Damper 3/4'' Mesh
SKU: NLE5CO_09507
MPN: 9507
$399.00
$342.07


(1 review) Write a Review
RECOMMENDED USES
    New Lock-Top II 13" x 13" Chimney Cap/Damper - This premier energy-saving product is 90% more efficient than a traditional throat damper. With todays skyrocketing energy costs, the dollars saved in heat loss make a cap/damper combination a better choice than a chimney cap alone. The energy savings will quickly pay for the installation. The Lock-Top II Chimney Cap/Damper arrives fully assembled and ready to install. Its...
In Stock: Ships in 5 to 7 business days
$399.00
$342.07
  • Details

    New Lock-Top II 13" x 13" Chimney Cap/Damper - This premier energy-saving product is 90% more efficient than a traditional throat damper. With todays skyrocketing energy costs, the dollars saved in heat loss make a cap/damper combination a better choice than a chimney cap alone. The energy savings will quickly pay for the installation.

    The Lock-Top II Chimney Cap/Damper arrives fully assembled and ready to install. The base mounts to a sweep's ring which then is connected to the flue tile with a high temp silicone sealant. A 30' stainless steel cable drops down the flue, and a hardware set mounts in the firebox. The end result is a damper that opens and closes with ease at the tug of a drop down cable. The Lock-Top II is equipped with a fire safety device that enables the damper to remain open in case of a chimney fire.

    *Top-sealing dampers are not recommended with gas logs- failure to open could cause carbon monoxide to back up into the house.

    • Measures 13" x 13"
    • 3/4" mesh screen
    • 11 3/8" Overall height
    • 100 sq. in. cross-sectional area
    • Fits inside flue sizes 9" x 9" to 12 1/2" x 12 1/2"
    • 30' Stainless steel cable included
    • Silicone sealant included
    • Sweep's ring included



    Specifications:
    • Measures 13" x 13"
    • 3/4" Mesh screen
    • 11 3/4" Overall height
    • Fits inside flue sizes 9" x 9" to 12 1/2" x 12 1/2"
    • Stainless steel and cast aluminum construction
    • Silicone sealant, sweep's ring, 30' stainless steel cable included
  • Additional Information
    Clearance Non-Clearance
    Country Of Origin United States
    Fits Lengths From 11 Inch
    Fits Lengths From 12.5 Inch
    Fits Lengths From 9.5 Inch
    Fits Lengths From 9 Inch
    Fits Lengths From 10.5 Inch
    Fits Lengths From 10.5 Inch
    Fits Lengths From 11.5 Inch
    Fits Lengths From 12 Inch
    Fits Lengths From 10 Inch
    Fits Widths From 10 Inch
    Fits Widths From 11 Inch
    Fits Widths From 11.5 Inch
    Fits Widths From 9 Inch
    Fits Widths From 9.5 Inch
    Fits Widths From 12 Inch
    Fits Widths From 12.5 Inch
    Fits Widths From 10.5 Inch
    Product Type Chimney Caps
    Pipe Piece Damper
    Pipe Piece Chimney Cap
    Mesh 3/4in Mesh
    Left Overlay Image ets-made-usa-prod.png
    Additional Information

     Installation Instructions

    Brand LockTop
  • 1 Review

    1 Review

    • 2
      Flimsy, deceptive warranty

      Posted by Bob L on Feb 26th 2020

      My first one lasted about 6 years, at which time the spring failed. Lymance replaced it through Northline per their "Lifetime Warranty". After about 6 years the second one failed .

New Lock-Top II 13" x 13" Chimney Cap/Damper - This premier energy-saving product is 90% more efficient than a traditional throat damper. With todays skyrocketing energy costs, the dollars saved in heat loss make a cap/damper combination a better choice than a chimney cap alone. The energy savings will quickly pay for the installation.

The Lock-Top II Chimney Cap/Damper arrives fully assembled and ready to install. The base mounts to a sweep's ring which then is connected to the flue tile with a high temp silicone sealant. A 30' stainless steel cable drops down the flue, and a hardware set mounts in the firebox. The end result is a damper that opens and closes with ease at the tug of a drop down cable. The Lock-Top II is equipped with a fire safety device that enables the damper to remain open in case of a chimney fire.

*Top-sealing dampers are not recommended with gas logs- failure to open could cause carbon monoxide to back up into the house.

  • Measures 13" x 13"
  • 3/4" mesh screen
  • 11 3/8" Overall height
  • 100 sq. in. cross-sectional area
  • Fits inside flue sizes 9" x 9" to 12 1/2" x 12 1/2"
  • 30' Stainless steel cable included
  • Silicone sealant included
  • Sweep's ring included



Specifications:
  • Measures 13" x 13"
  • 3/4" Mesh screen
  • 11 3/4" Overall height
  • Fits inside flue sizes 9" x 9" to 12 1/2" x 12 1/2"
  • Stainless steel and cast aluminum construction
  • Silicone sealant, sweep's ring, 30' stainless steel cable included
Clearance Non-Clearance
Country Of Origin United States
Fits Lengths From 11 Inch
Fits Lengths From 12.5 Inch
Fits Lengths From 9.5 Inch
Fits Lengths From 9 Inch
Fits Lengths From 10.5 Inch
Fits Lengths From 10.5 Inch
Fits Lengths From 11.5 Inch
Fits Lengths From 12 Inch
Fits Lengths From 10 Inch
Fits Widths From 10 Inch
Fits Widths From 11 Inch
Fits Widths From 11.5 Inch
Fits Widths From 9 Inch
Fits Widths From 9.5 Inch
Fits Widths From 12 Inch
Fits Widths From 12.5 Inch
Fits Widths From 10.5 Inch
Product Type Chimney Caps
Pipe Piece Damper
Pipe Piece Chimney Cap
Mesh 3/4in Mesh
Left Overlay Image ets-made-usa-prod.png
Additional Information

 Installation Instructions

Brand LockTop

1 Review

  • 2
    Flimsy, deceptive warranty

    Posted by Bob L on Feb 26th 2020

    My first one lasted about 6 years, at which time the spring failed. Lymance replaced it through Northline per their "Lifetime Warranty". After about 6 years the second one failed .

SPECIAL OFFER