Peterson Gas Logs are handcrafted, hand-painted, and guaranteed to grace your home with incomparable individuality, pleasing aesthetics, and unbeatable quality. The Charred Oak Series Gas Log Set is as close to the real thing as you can get. Each piece is carefully shaded and detailed with textured bark, knot holes, and a burned-through center log to create the experience of a lifelike smoldering campfire. Enjoy the RealFyre experience in your home year after year with the Charred Oak Gas Log Set and Burner Kit.
The G4 Glowing Ember Burner System produces an authentic glowing ember bed and dancing flames that cascade throughout the Charred Oak log set to create a real, wood burning fire experience. The G4 Glowing Ember Burner features a steel construction and is coated with a heat-resistant black paint that gracefully withstands the burner's 120,000 BTU emissions. Included with the burner is a custom log grate, glowing embers, silica sand, a bendable connector kit with brass fittings for 1/2" line, grate clamps, a damper clamp, and installation instructions.
California Prop 65 Notice - WARNING: This product can expose you to carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov
- Flexible installation options
- Minimal installation is required
- Installation for heat or ambiance
- No mess, require little maintenance
- Realistic logs and flame presentation
- Reinforced ceramic build will last for years
- Clean, convenient and easy fire in seconds
- Enhances aesthetic appeal whether turned on or off
Choosing a valve control:
You will need to purchase one of the valves listed below separately.
- The Peterson RealFyre Safety Pilot Kit (5RP-SPK26) is a standing pilot system that offers manual variable flame control. It features a low profile build and includes a heat shield. The Peterson SPK-26 Safety Pilot System is compatible with most RealFyre vented burners.
- Real Fyre APK-11 Remote On/Off Pilot System (5RP-APK11) allows you to control your system using a remote control, wall switch, or the manual knob on the burner system. This system does not have variable flame height control. The flame will always be the same height.
- The Peterson RealFyre Automatic Variable Flame Pilot Kit (5RP-APK15) allows for adjustment of flame height and heat out put with a remote control.
Customers are responsible for checking local codes and regulations prior to purchase.
- Measures 18"/20"
- Reinforced with steel rods
- Durably constructed of ceramic
- Includes G4 Glowing Ember Burner System
- Hand-painted and handcrafted from real wood samples