null

Menu

3'' to 4'' Selkirk VP Pellet Vent Pipe Thru-the-Wall Kit - 3/4VP-KIT

3'' to 4'' Selkirk VP Pellet Vent Pipe Thru-the-Wall Kit - 3/4VP-KIT
SKU: NLE5SE_3_4VP_KIT
MPN: 284875
$810.99
$519.14


(No reviews yet) Write a Review
RECOMMENDED USES
    The Selkirk 3/4VP Thru-the-Wall Pellet Stove Kit is designed for horizontal installations only. Kit Includes: 1 - 4" 90° Elbow 1 - 4" Tee Support 1 - 4" Wall Bracket 1 - 4" Wall Thimble 1 - 4" Horizontal Cap 1 - 4" Pipe Connector 1 - 3" Pipe Connector 1 - 4" Tee with Cleanout 1 - 3" to 4" Pellet Increaser 5 - 4" One-foot Pipe Lengths VP Pellet Pipe is used for venting pellet or corn burning stoves approved for use...
In Stock
$810.99
$519.14
  • Details

    The Selkirk 3/4VP Thru-the-Wall Pellet Stove Kit is designed for horizontal installations only.

    Kit Includes:
    • 1 - 4" 90° Elbow
    • 1 - 4" Tee Support
    • 1 - 4" Wall Bracket
    • 1 - 4" Wall Thimble
    • 1 - 4" Horizontal Cap
    • 1 - 4" Pipe Connector
    • 1 - 3" Pipe Connector
    • 1 - 4" Tee with Cleanout
    • 1 - 3" to 4" Pellet Increaser
    • 5 - 4" One-foot Pipe Lengths

    VP Pellet Pipe is used for venting pellet or corn burning stoves approved for use with PL-Vent. The appliance's flue gases must not exceed 570° F (298.80° C).

    See all 4" VP Pellet Pipe Components
    Additional Information:

    Metalbestos gives you the safe, efficient, and cost-effective venting system that's engineered precisely for pellet and corn burning stoves. Model VP Pellet Pipe has been tested and listed by Underwriters' Laboratories, Inc., in accordance with UL-641 Standard for Low Temperature Venting Systems, as well as the applicable requirements from UL-103 Standard for Residential Type and Building Heating Appliance Chimneys. Model VP Pellet Pipe, when installed according to Metalbestos installation instructions, complies with National Safety Standards, such as NFPA-211. The system is rated for flue temperatures up to 570° F.


    Specifications:
    • Diameter: 4"
    • Clearances: 3" clearance to combustibles
    • Listings: UL 641 (Standard for Low Temperature Venting). UL 103 (Standard for Residential Type and Building Heating Appliance Chimneys)
    • 1 - 4" Horizontal Cap
    • 1 - 4" 90° Elbow
    • 1 - 4" Wall Bracket
    • 5 - 4" One-foot Pipe Lengths
    • 1 - 4" Tee with Cleanout
    • 1 - 4" Wall Thimble
    • 1 - 4" Tee Support
    • 1 - 3" to 4" Pellet Increaser
    • 1 - 4" Pipe Connector
    • 1 - 3" Pipe Connector
  • Additional Information
    Clearance Non-Clearance
    Country Of Origin United States
    Pipe Wall Single Wall
    Pipe Piece Vent Pipe
    Type Pellet Vent Pipe
    Diameter 3 Inch
    Diameter 4 Inch
    Left Overlay Image ets-made-usa-prod.png
    Product Type Chimney Pipe
    Brand Selkirk VP

The Selkirk 3/4VP Thru-the-Wall Pellet Stove Kit is designed for horizontal installations only.

Kit Includes:
  • 1 - 4" 90° Elbow
  • 1 - 4" Tee Support
  • 1 - 4" Wall Bracket
  • 1 - 4" Wall Thimble
  • 1 - 4" Horizontal Cap
  • 1 - 4" Pipe Connector
  • 1 - 3" Pipe Connector
  • 1 - 4" Tee with Cleanout
  • 1 - 3" to 4" Pellet Increaser
  • 5 - 4" One-foot Pipe Lengths

VP Pellet Pipe is used for venting pellet or corn burning stoves approved for use with PL-Vent. The appliance's flue gases must not exceed 570° F (298.80° C).

See all 4" VP Pellet Pipe Components
Additional Information:

Metalbestos gives you the safe, efficient, and cost-effective venting system that's engineered precisely for pellet and corn burning stoves. Model VP Pellet Pipe has been tested and listed by Underwriters' Laboratories, Inc., in accordance with UL-641 Standard for Low Temperature Venting Systems, as well as the applicable requirements from UL-103 Standard for Residential Type and Building Heating Appliance Chimneys. Model VP Pellet Pipe, when installed according to Metalbestos installation instructions, complies with National Safety Standards, such as NFPA-211. The system is rated for flue temperatures up to 570° F.


Specifications:
  • Diameter: 4"
  • Clearances: 3" clearance to combustibles
  • Listings: UL 641 (Standard for Low Temperature Venting). UL 103 (Standard for Residential Type and Building Heating Appliance Chimneys)
  • 1 - 4" Horizontal Cap
  • 1 - 4" 90° Elbow
  • 1 - 4" Wall Bracket
  • 5 - 4" One-foot Pipe Lengths
  • 1 - 4" Tee with Cleanout
  • 1 - 4" Wall Thimble
  • 1 - 4" Tee Support
  • 1 - 3" to 4" Pellet Increaser
  • 1 - 4" Pipe Connector
  • 1 - 3" Pipe Connector
Clearance Non-Clearance
Country Of Origin United States
Pipe Wall Single Wall
Pipe Piece Vent Pipe
Type Pellet Vent Pipe
Diameter 3 Inch
Diameter 4 Inch
Left Overlay Image ets-made-usa-prod.png
Product Type Chimney Pipe
Brand Selkirk VP

SPECIAL OFFER