null

Menu

4'' Selkirk VP Pellet Vent Pipe 45 Degree Elbow - 4VP-45 EL

4'' Selkirk VP Pellet Vent Pipe 45 Degree Elbow - 4VP-45 EL
SKU: NLE5SE_4VP_45_EL
MPN: 244216-BREAK CASE
$88.99
$60.44


(No reviews yet) Write a Review
RECOMMENDED USES
    Selkirk VP Pellet Pipe 45° Elbow is used for a 45° offset and can be used in vertical and horizontal installations. Features proven gasketed coupling joints that connect in seconds to assure joint integrity. Available in 3" and 4" diameters constructed of 304 stainless steel inner wall and paintable galvanized outer wall. Internal spacing bead assures uniform insulating air space between pipe walls, and allows...
In Stock
$88.99
$60.44
  • Details

    Selkirk VP Pellet Pipe 45° Elbow is used for a 45° offset and can be used in vertical and horizontal installations. Features proven gasketed coupling joints that connect in seconds to assure joint integrity. Available in 3" and 4" diameters constructed of 304 stainless steel inner wall and paintable galvanized outer wall. Internal spacing bead assures uniform insulating air space between pipe walls, and allows for 3" clearance to combustible materials. Male end is rolled over eliminating sharp edges.

    VP Pellet Pipe is used for venting pellet or corn burning stoves approved for use with PL-Vent. The appliance's flue gases must not exceed 570° F (298.80° C).

    See all 4" VP Pellet Pipe Components
    Additional Information:

    Metalbestos gives you the safe, efficient, and cost-effective venting system that's engineered precisely for pellet and corn burning stoves. Model VP Pellet Pipe has been tested and listed by Underwriters' Laboratories, Inc., in accordance with UL-641 Standard for Low Temperature Venting Systems, as well as the applicable requirements from UL-103 Standard for Residential Type and Building Heating Appliance Chimneys. Model VP Pellet Pipe, when installed according to Metalbestos installation instructions, complies with National Safety Standards, such as NFPA-211. The system is rated for flue temperatures up to 570°F.

      Installation Instructions


    Specifications:
    • Diameter: 4"
    • Construction Materials: 304 Stainless Steel Inner Wall, Paintable Galvanized Outer Wall
    • Clearance: 3" to Combustible Material
    • Listings: UL 103, ULC S609, ULC/ORD C441 and UL 641
  • Additional Information
    Clearance Non-Clearance
    Country Of Origin United States
    Pipe Wall Double Wall
    Pipe Piece 45 Degree Elbow
    Type Pellet Vent Pipe
    Diameter 4 Inch
    Left Overlay Image ets-made-usa-prod.png
    Product Type Chimney Pipe
    Brand Selkirk VP

Selkirk VP Pellet Pipe 45° Elbow is used for a 45° offset and can be used in vertical and horizontal installations. Features proven gasketed coupling joints that connect in seconds to assure joint integrity. Available in 3" and 4" diameters constructed of 304 stainless steel inner wall and paintable galvanized outer wall. Internal spacing bead assures uniform insulating air space between pipe walls, and allows for 3" clearance to combustible materials. Male end is rolled over eliminating sharp edges.

VP Pellet Pipe is used for venting pellet or corn burning stoves approved for use with PL-Vent. The appliance's flue gases must not exceed 570° F (298.80° C).

See all 4" VP Pellet Pipe Components
Additional Information:

Metalbestos gives you the safe, efficient, and cost-effective venting system that's engineered precisely for pellet and corn burning stoves. Model VP Pellet Pipe has been tested and listed by Underwriters' Laboratories, Inc., in accordance with UL-641 Standard for Low Temperature Venting Systems, as well as the applicable requirements from UL-103 Standard for Residential Type and Building Heating Appliance Chimneys. Model VP Pellet Pipe, when installed according to Metalbestos installation instructions, complies with National Safety Standards, such as NFPA-211. The system is rated for flue temperatures up to 570°F.

  Installation Instructions


Specifications:
  • Diameter: 4"
  • Construction Materials: 304 Stainless Steel Inner Wall, Paintable Galvanized Outer Wall
  • Clearance: 3" to Combustible Material
  • Listings: UL 103, ULC S609, ULC/ORD C441 and UL 641
Clearance Non-Clearance
Country Of Origin United States
Pipe Wall Double Wall
Pipe Piece 45 Degree Elbow
Type Pellet Vent Pipe
Diameter 4 Inch
Left Overlay Image ets-made-usa-prod.png
Product Type Chimney Pipe
Brand Selkirk VP

SPECIAL OFFER