The ZCFH Fireplace Heater (for smaller fireplaces) was developed to dramatically
increase convection heat (hot air) coming from your fireplace. The unique design
of this grate heater super heats the air within the exchanger tubes to over 500'F
and will produce up to 50,000+ BTUs of heat; enough to heat a large room or two!
It fits into most fireplaces and has a limited one-year warranty.
Hearth Heater features heavy heavy-gauge aluminized steel tubes for long life. Its
unique design still allows it to work during power outages by converting heat naturally
through the tubing and into your home. The blower is connected to the grate by means
of a flexible tube, which allows the blower to be positioned in front of the fireplace
opening. Measures 17 7/8" High x 17 1/4" Deep x 14 1/8" back width.
- Low cost
- Fits most fireplaces (measure first)
- Simple installation
- 500% heat output increase
- Heavy tubing for long life
- Works without power
- Heat Pipes are made of .063 gauge aluminized steel which inhibits burn thru
- Optional Blower Kit can be added
for extra heat
- Diameter of tubes 1-3/4"
- Leg Height is 1.5''
Note: May be used with a gas log lighter as long as clearances allow for placement under the grate.
BEFORE YOU BURN: There will be a smell on the first burn as the oil in the tubes will burn off. This is normal. WARNING: If you have birds and animals in the house. They should be removed from the house on the first burn. People that are asthmatic and children should also not be in the area during the first burn.