5'' DuraFlexSS 316 Tee Kit with 30' Flex

DuraFlex 316 Tee Kit with 30' Flexible Stainless Steel Chimney Liner is perfect for relining your tall or two story masonry chimney. Use with gas, wood pellet, oil, or wood appliance. Applications include: fireplace inserts, furnaces, boilers, and water heaters. DuraFlex 316 Tee Kit with 30' Flexible Stainless Steel Chimney Liner is designed for use in harsher conditions, for more resistance to corrosion, such as coal. DuraFlex 316SS is listed to UL 1777 and ULC S635.

Kit includes: DuraFlex SS Top Plate, DuraFlex SS Cap, DuraFlex SS TeeConnector, and DuraFlex 316 30 Foot length.

See all 5" DuraFlex SS chimney liner components.

DuraFlex SS relining systems ensure safe and efficient venting of heating appliances while protecting the masonry chimney from the damaging effects of flue product condensation. DuraFlex is available in 304 and 316Ti stainless steel. The 304 and 316Ti SS are designed for use with pellet, non-condensing gas, and oil appliances. DuraFlex SS and 316Ti SS, when used with the Simpson DuraVent Two-Ply Insulation Sleeve, may be used for relining wood burning fireplace inserts and stoves to meet UL 1777 and ULC S635 standards with 0" clearance to masonry.

  Installation Instructions

• 5" Diameter
• Listed to UL 1777 and ULC S635
• 0" clearance for gas, oil, and pellet applications
• 1" clearance to masonry for wood-burning applications
• Construction materials: .005" 316 stainless steel single wall
• Kit includes: DuraFlex SS top plate, DuraFlex SS cap, Duraflex SS Tee connector, and DuraFlex 316 30' liner length

WARNING: This product can expose you to chemicals including Chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.