null 6'' Selkirk SuperVent 2100 Insulated Tee Plug

Menu

6'' Selkirk SuperVent 2100 Insulated Tee Plug

6''  Selkirk SuperVent 2100 Insulated Tee Plug
SKU: NLE5SE_J62TPI
MPN: J62TPI
$229.38
$107.99


(No reviews yet) Write a Review
RECOMMENDED USES
    For Use in Canadian Installations

    The SuperVent 2100 is designed for today’s Wood Stoves which are engineered to produce low emissions, provide less heat up the chimney and more heat into the room. A high insulating value allows SuperVent 2100 to maintain a strong draft, even when faced with these low stack temperatures. This makes SuperVent 2100 the choice of professionals who are looking for a better quality, factory built chimney system.

In Stock: Ships in 7 to 10 business days
$229.38
$107.99
  • Details

    THIS INCLUDES:

  • Tee Plug (Cap)

SuperVent 2100 has been tested and listed to ULC standard CAN/ULC-S629 requiring this system to withstand temperatures of up to 2100° F (1150°C) for three, thirty minute intervals. SuperVent 2100 chimney is also listed and tested to Type HT requirements of Underwriters Laboratories, Inc., Standard ANSI/UL 103 HT. SuperVent 2100 chimney conforms to the installation code for solid fuel burning appliances CSA B365. The minimum clearances shown are proven safe during the fire tests conducted with the component supports and spacers in actual contact with combustible framing. Proper installation must be followed with the instructions provided using each support assembly. Although primarily used in venting solid fuel applications, SuperVent 2100 is an all-fuel chimney also intended for venting gas or liquid fuel residential type appliances and building heating appliances

All SuperVent 2100 Supports are designed to carry four times the combined weight of each system at maximum allowable height

The chimney must extend at least three feet above the highest point where it passes through the roof surface and at least two feet higher than any part of the building within a horizontal distance of ten feet

See all 6" Selkirk SuperVent 2100 Chimney Components.

  • Additional Information
    Clearance Non-Clearance
    Country Of Origin Canada
    Type Class A Pipe
    Type Solid Pack
    Pipe Wall Double Wall
    Product Type Chimney Pipe
    Diameter 6 Inch
    Brand SuperVent 2100
  • THIS INCLUDES:

  • Tee Plug (Cap)
  • SuperVent 2100 has been tested and listed to ULC standard CAN/ULC-S629 requiring this system to withstand temperatures of up to 2100° F (1150°C) for three, thirty minute intervals. SuperVent 2100 chimney is also listed and tested to Type HT requirements of Underwriters Laboratories, Inc., Standard ANSI/UL 103 HT. SuperVent 2100 chimney conforms to the installation code for solid fuel burning appliances CSA B365. The minimum clearances shown are proven safe during the fire tests conducted with the component supports and spacers in actual contact with combustible framing. Proper installation must be followed with the instructions provided using each support assembly. Although primarily used in venting solid fuel applications, SuperVent 2100 is an all-fuel chimney also intended for venting gas or liquid fuel residential type appliances and building heating appliances

    All SuperVent 2100 Supports are designed to carry four times the combined weight of each system at maximum allowable height

    The chimney must extend at least three feet above the highest point where it passes through the roof surface and at least two feet higher than any part of the building within a horizontal distance of ten feet

    See all 6" Selkirk SuperVent 2100 Chimney Components.

    Clearance Non-Clearance
    Country Of Origin Canada
    Type Class A Pipe
    Type Solid Pack
    Pipe Wall Double Wall
    Product Type Chimney Pipe
    Diameter 6 Inch
    Brand SuperVent 2100

    SPECIAL OFFER