6" SuperPro Locking Band

Two flanges engage the grooves in each end of the adjoining sections, holding them securely together.  Locking Bands must be used on the following:

• All sections that make up an offset
• On tee branch to attach a chimney length
• On any length suspended below the Cathdral or roof support

While locking bands are not required on other chimney lengths, their use is recommended for added safety and stability.  It also provides a more attractive appearance.

See all 6" Selkirk SuperPro Components.

Additional Information:

SuperPro is safety tested and listed to applicable UL/ULC standards.  These include USA: UL 103-HT safety standards for chimneys serving solid fuel and liquid fuel appliances.  This chimney system has been designed for use on wood stoves, fireplaces, and residential furnaces in the U.S. market.

Allowable flue gas temperatures are as follows:

• Maximum continuous: 1000 Degrees F / 500 Degrees C
• Brief forced firing: 1400 Degrees F / 760 Degrees C
• Creosote burn out: 2100 Degrees F / 1150 Degrees C

  Installation Planning Guide

  Installation Instructions

• Opening Dimensions: 8" Diameter x 7/16'' Wide
• Clearances: 2" to combustibles
• Construction materials: Stainless steel
• Listings: Safety tested and listed to applicable UL/ULC standards USA: UL 103 HT

All Selkirk Corporation venting products are now backed with a Lifetime Limited Warranty. Please refer to the warranty included with the product for specific details or contact customer service for a copy.