-
Details
Custom Size Heaters cannot be returned nor exchanged. Please verify your measurements before ordering. This unit is a custom size.
The Fireplace Heater was developed to dramatically increase convection heat (hot air) coming from your fireplace. The unique design of this grate heater super heats the air within the exchanger tubes to over 500'F and will produce up to 50,000+ BTUs of heat, enough to heat a large room or two. It fits into most fireplaces and has a limited one-year warranty. The FHK Heater is easy to install; simply assemble the blower on the tubes, seal it with the supplied silicone sealer, and place into your fireplace.
The FHK Hearth Heater features heavy heavy-gauge aluminized steel tubes for long life. Its unique design still allows it to work during power outages by converting heat naturally through the tubing and into your home. The blower is connected to the grate by means of a flexible tube, which allows the blower to be positioned in front of the fireplace opening. Measures: 20-1/2" High, 20" Deep, 29" Front Width, and 21" Back Width.
Click here for a brochure. For smaller fireplaces see theFHZC Fireplace Heater.
Product Note: This fireplace heater is a custom size and will take approx 2 to 4 weeks to receive.- Low Cost
- Simple Installation
- Works during a power outage
- Fits most fireplaces (See additional information tab for sizing)
- Heavy gauge aluminized steel tubing for long life
- Blower Box can mount on left or right side by flipping the manifold
- 2 Speed blower delivers up to 72,000 BTU's of heat for a 500% heat output increase!
- Can be used with a glass fireplace door but additional flexible hose may be needed and must be removed to close the doors when not in use. .
Additional Information:
Number of
TubesFront WidthRear widthFront HeightRear HeightDepthBTU per
Hour (max)5 Tube (standard size)25"17"20 1/2"13 1/2"18"60,0006 Tubes29"21"20 1/2"13 1/2"18"72,0007 Tubes33"25"20 1/2"13 1/2"18"84,0008 Tubes37"29"20 1/2"13 1/2"18"96,0009 Tubes41"33"20 1/2"13 1/2"18"108,00010 Tubes45"37"20 1/2"13 1/2"18"120,000
Specifications:- 2 speed blower
- 160 CFM Fan on blower
- Delivers up to 72,000 BTU's of heat
- Diameter of tubes 1-3/4"
- Heat Pipes are made of .063 heavy gauge aluminized steel which inhibits burn thru and rust.
- Flexible blower connector is adjustable from 8" to 18" and can be extended if necessary by ordering an additional flexible tube.
- Size: 20-1/2" High, 20" Deep, 29" Front Width, and 21" Back Width.
- See Additional information tab for sizing
-
Additional Information
Clearance Non-Clearance Country Of Origin United States Product Type Fireplace Grates Left Overlay Image Made in America.png Color Silver Color Name Silver Brand Custom Firescreen
Custom Size Heaters cannot be returned nor exchanged. Please verify your measurements before ordering. This unit is a custom size.
The Fireplace Heater was developed to dramatically increase convection heat (hot air) coming from your fireplace. The unique design of this grate heater super heats the air within the exchanger tubes to over 500'F and will produce up to 50,000+ BTUs of heat, enough to heat a large room or two. It fits into most fireplaces and has a limited one-year warranty. The FHK Heater is easy to install; simply assemble the blower on the tubes, seal it with the supplied silicone sealer, and place into your fireplace.
The FHK Hearth Heater features heavy heavy-gauge aluminized steel tubes for long life. Its unique design still allows it to work during power outages by converting heat naturally through the tubing and into your home. The blower is connected to the grate by means of a flexible tube, which allows the blower to be positioned in front of the fireplace opening. Measures: 20-1/2" High, 20" Deep, 29" Front Width, and 21" Back Width.
Click here for a brochure. For smaller fireplaces see theFHZC Fireplace Heater.
Product Note: This fireplace heater is a custom size and will take approx 2 to 4 weeks to receive.
- Low Cost
- Simple Installation
- Works during a power outage
- Fits most fireplaces (See additional information tab for sizing)
- Heavy gauge aluminized steel tubing for long life
- Blower Box can mount on left or right side by flipping the manifold
- 2 Speed blower delivers up to 72,000 BTU's of heat for a 500% heat output increase!
- Can be used with a glass fireplace door but additional flexible hose may be needed and must be removed to close the doors when not in use. .
Additional Information:
Number of Tubes | Front Width | Rear width | Front Height | Rear Height | Depth | BTU per Hour (max) |
|---|---|---|---|---|---|---|
5 Tube (standard size) | 25" | 17" | 20 1/2" | 13 1/2" | 18" | 60,000 |
6 Tubes | 29" | 21" | 20 1/2" | 13 1/2" | 18" | 72,000 |
7 Tubes | 33" | 25" | 20 1/2" | 13 1/2" | 18" | 84,000 |
8 Tubes | 37" | 29" | 20 1/2" | 13 1/2" | 18" | 96,000 |
9 Tubes | 41" | 33" | 20 1/2" | 13 1/2" | 18" | 108,000 |
10 Tubes | 45" | 37" | 20 1/2" | 13 1/2" | 18" | 120,000 |
Specifications:
- 2 speed blower
- 160 CFM Fan on blower
- Delivers up to 72,000 BTU's of heat
- Diameter of tubes 1-3/4"
- Heat Pipes are made of .063 heavy gauge aluminized steel which inhibits burn thru and rust.
- Flexible blower connector is adjustable from 8" to 18" and can be extended if necessary by ordering an additional flexible tube.
- Size: 20-1/2" High, 20" Deep, 29" Front Width, and 21" Back Width.
- See Additional information tab for sizing
| Clearance | Non-Clearance |
|---|---|
| Country Of Origin | United States |
| Product Type | Fireplace Grates |
| Left Overlay Image | Made in America.png |
| Color | Silver |
| Color Name | Silver |
| Brand | Custom Firescreen |
