null Fireplace Patch - Gray

Menu

Fireplace Patch - Gray

Fireplace Patch - Gray
SKU: NLE5RU_62
MPN: 62-6
$11.00
$8.25


(1 review) Write a Review
RECOMMENDED USES

    Fill in cracks and holes in masonry firebox or outdoor firepit with Fireplace Patch. Repair can be made quickly and painlessly because it does not need heat to cure nor does it need to be layered.

    • Fills holes up to 15 cubic inches
    • Withstands 2000° F
In Stock
$11.00
$8.25
  • Details

    Fireplace Patch is the ideal product to fill a hole or crack in a masonry firebox. It does not require heat to cure and it does not need to be layered. It withstands 2000° F and can also be used to make repairs in an outdoor fire pit.

      Technical Data Sheet

      MSDS


    Specifications:
    • Color: Gray
    • 1.5 pound container
    • Cures without heat
    • Fills holes up to 15 cubic inches
    • For making repairs in fireboxes & outdoor firepits

    proposition 65 warning symbolWARNING: This product can expose you to chemicals including Crystalline Silica, which is known to the State of California to cause cancer. For more information go to http://www.P65Warnings.ca.gov.

  • Additional Information
    Clearance Non-Clearance
    Country Of Origin United States
    Product Type Chimney Maintenance
    Left Overlay Image ets-made-usa-prod.png
    Brand Rutland
  • 1 Review

    1 Review

    • 5
      Cracked Heatilator "Firebrick" liner

      Posted by Wry Ipx on Dec 17th 2020

      I heat with Heatilator fireplace lined with (roughly) 22" x 18" x 3/4" "firebrick" plates. These tend to get major cracks when carelessly tossing in logs. I use this to repair (I MUST have this product on hand for seasonal repairs). Works GREAT. I've tested & intend to "cast" new plates with this. NOTE: Bursh, vacuum & water spray bottle clean before applying. Moisten before application & Protect areas where "drips" possible. Sets QUICK ! Push into cracks from "Hand mortar board" using small trowel. LIGHT water spray to keep MOIST during "hydrating / curing process (every 1/2 hr for 6 hrs Min). WEAR dust mask, gloves, safety glasses. DO NOT let get in eyes, on skin. DO NOT clean tools in sink or let this product get in your house drain pipes!

Fireplace Patch is the ideal product to fill a hole or crack in a masonry firebox. It does not require heat to cure and it does not need to be layered. It withstands 2000° F and can also be used to make repairs in an outdoor fire pit.

  Technical Data Sheet

  MSDS


Specifications:
  • Color: Gray
  • 1.5 pound container
  • Cures without heat
  • Fills holes up to 15 cubic inches
  • For making repairs in fireboxes & outdoor firepits

proposition 65 warning symbolWARNING: This product can expose you to chemicals including Crystalline Silica, which is known to the State of California to cause cancer. For more information go to http://www.P65Warnings.ca.gov.

Clearance Non-Clearance
Country Of Origin United States
Product Type Chimney Maintenance
Left Overlay Image ets-made-usa-prod.png
Brand Rutland

1 Review

  • 5
    Cracked Heatilator "Firebrick" liner

    Posted by Wry Ipx on Dec 17th 2020

    I heat with Heatilator fireplace lined with (roughly) 22" x 18" x 3/4" "firebrick" plates. These tend to get major cracks when carelessly tossing in logs. I use this to repair (I MUST have this product on hand for seasonal repairs). Works GREAT. I've tested & intend to "cast" new plates with this. NOTE: Bursh, vacuum & water spray bottle clean before applying. Moisten before application & Protect areas where "drips" possible. Sets QUICK ! Push into cracks from "Hand mortar board" using small trowel. LIGHT water spray to keep MOIST during "hydrating / curing process (every 1/2 hr for 6 hrs Min). WEAR dust mask, gloves, safety glasses. DO NOT let get in eyes, on skin. DO NOT clean tools in sink or let this product get in your house drain pipes!

SPECIAL OFFER