Hot Water Coil Kit - 1124

Hot Water Coil Kit - 1124 Increase the functionality of your warm air furnace with our hot water coil kit. After installation of this kit, you can now circulate water within your wood or coal burning stove directly to the hot water heater boosting your homes energy efficiency! It is not necessary to use pumps, controls or electricity. Heated water from the hot water coil is less dense, lighter, and naturally rises to the top of the water-heater or storage tank. The cooler water in the bottom of the water-heater/storage tank is heavier and "falls" down the plumbing line to the hot water coil, completing the cycle. The flow is slow and is reduced by long runs. This is only possible if the water heater or storage tank is higher than the woodstove and close to it. An ideal thermosiphon arrangement would be to place the water-heater on the next floor above the woodstove, in an attic, closet, or elevated in the garage opposite the woodstove wall (a stand can be built under the water-heater). There are three different methods for installing your hot water coil kit and storage tank or hot water heater. These methods include the thermo-siphon method, which is the simplest of the three, tempering tank method and the circulating pump method. There's a manual on our page to help assist you in finding what will work the best for you and your home.

• 24" long
• Boosts hot water heater efficiency
• No need for pumps, controls or electricity
• Versatile Design
• Easy installation on any USSC furnace.

Compatible Stove Models:

• 30A
• 24A
• 1602R
• 1802G

US Stove Company- When some people look at a crackling fire, they see more than a cozy atmosphere. They see freedom. Freedom from dependence on energy they can't get, or don't want. Freedom from modern life's uncertainties. Freedom to live in the way they choose, in homes that are more truly their own.

That's what we see, too. For over 150 years, US Stove Company has been empowering that spirit of freedom with heating appliances that keep Americans warm and self-reliant. As America's hearths transformed from nation-building necessity to proud symbol of independence, we've remained obsessed with inventing and building the heating appliances that make it possible.

As we look forward to our next 150 years, that's one thing that won't change. US Stove Company will continue to perfect biomass heating so that it has a clean, safe, renewable role in the energy-secure future we all want. Because we know what keeps America's home fires burning.

What is a hot water coil? A Hot Water Coil for wood and coal stoves works by heating water within a metal pipe that circulates water through the inside of your woodstove and then directly to your hot water heater.

How do I make hot water in my wood stove? Your wood or coal burning stove can heat up water within your Warm air furnace by installing a hot water coil kit. It works by heating water within a metal pipe that circulates water through the inside of your woodstove and then directly to your hot water heater. There are three methods of installing a hot water coil, you just have to figure out which one will be the most convenient for your home.

Coal stove, Pellet stove & Wood stove Heating: This particular hot water coil kit from US Stove Company was designed to be used in conjunction with compatible models of coal and wood burning stoves. This hot water coil kit is not compatible with pellet burning stoves.

Stainless steel & Domestic Hot Water Coils: There are different terms used for hot water coils, stainless steel hot water coils and domestic hot water coils are the same product but always be sure it will be compatible with the model of stove that you have or plan on purchasing.

• Fits models 1602M, 1600M, 1600G, 1602R, 1800G, 1802G, 24A, and 30A