Osburn Wood Stove Fresh Air Intake - OA10500

This Fresh Air Intake is for use with the Osburn 1000, 1100, 1600, 1800, 2200, and 2400 wood burning stoves to draw in fresh combustion air. That fresh air source can be a hole in the floor near the rear of the stove - terminating into a ventilated crawl space, or a hole in the wall behind the stove. Flexible pipe attaches to the inlet at the rear of the stove and to the outside source to supply combustion air to the fire. Kit includes oval outlet plate, restriction plate, and two screws

For a mobile home installation the stove must be connected to an outside source of combustion air. A 3" inside diameter metallic pipe, either flexible or rigid, may be attached to the inlet at the stove's rear. A rodent guard (minimum 1/4" wire mesh) must be used at the terminus. All connections must be secured and airtight by either using the appropriately sized hose clamp and/or UL-181-AP foil tape.

This kit fits the following Osburn wood burning stoves:

• Osburn 1000
• Osburn 1100
• Osburn 1600
• Osburn 1800
• Osburn 2200
• Osburn 2400

See all Osburn items.

• Insulated pipe is not included
• Rodent guard (minimum 1/4" wire mesh) must be used at the terminus
• Connections must be secured and airtight
• No combustion air supply may exceed 10 feet
• Fits Models:1000, 1100, 1600, 1800, 2200, 2400