Details
This telescoping flag pole has a total length of 22ft, approx 2 ft must be cemented in the ground so the exposed height is up to 20ft. The pole expands from 5ft to 20ft in seconds with a spring release button. There is no rope to snarl or tangle. The clips are mounted on rotating rings so the flag can not get tangled around the pole. This telescoping flag pole is not designed to fly a flag at half mast.

Made of rust-proof 2 1/4" diameter 16 gauge aluminum. 1 year Limited Warranty.

This Kit Includes:
- Plastic ground sleeve
- 3 inch diameter gold ball flagpole top
- A 3ft x 5ft sewn nylon US made flag with embroidered stars.
This product can be installed without expert assistance or a crane. The ground sleeve must be cemented into the ground to hold the pole vertically. Installation instructions are included.

Click for More Information on Flagpole Installaion

PLEASE NOTE: These flagpoles do NOT come with a locking collar and stop bolt. This flagpole does not require these hardware pieces.

This is a residential grade product and is not designed to fly a flag in severe weather. Please also see our commercial grade sectional poles which are rated at 92 mph wind gust with a 3ft x 5ft flag. However, these commercial poles are $260 and are heavier and more difficult to install.

The flagpole is made outside of the USA, and the Valley Forge US flag is made in the USA.

Clearance	Non-Clearance
Country Of Origin	China
Size	20ft
Type	Telescoping
Color	Silver
Type	Aluminum
Color Name	Silver
Brand	Super Tough

This telescoping flag pole has a total length of 22ft, approx 2 ft must be cemented in the ground so the exposed height is up to 20ft. The pole expands from 5ft to 20ft in seconds with a spring release button. There is no rope to snarl or tangle. The clips are mounted on rotating rings so the flag can not get tangled around the pole. This telescoping flag pole is not designed to fly a flag at half mast.

Made of rust-proof 2 1/4" diameter 16 gauge aluminum. 1 year Limited Warranty.

This Kit Includes:

Plastic ground sleeve
3 inch diameter gold ball flagpole top
A 3ft x 5ft sewn nylon US made flag with embroidered stars.

This product can be installed without expert assistance or a crane. The ground sleeve must be cemented into the ground to hold the pole vertically. Installation instructions are included.

Click for More Information on Flagpole Installaion

PLEASE NOTE: These flagpoles do NOT come with a locking collar and stop bolt. This flagpole does not require these hardware pieces.

This is a residential grade product and is not designed to fly a flag in severe weather. Please also see our commercial grade sectional poles which are rated at 92 mph wind gust with a 3ft x 5ft flag. However, these commercial poles are $260 and are heavier and more difficult to install.

The flagpole is made outside of the USA, and the Valley Forge US flag is made in the USA.