-
Details
The Lock-Top II Chimney Cap/Damper arrives fully assembled and ready to install. The base mounts to a sweep's ring which then is connected to the flue tile with a high temp silicone sealant. A 30' stainless steel cable drops down the flue, and a hardware set mounts in the firebox. The end result is a damper that opens and closes with ease at the tug of a drop down cable. The Lock-Top II is equipped with a fire safety device that enables the damper to remain open in case of a chimney fire.
*Top-sealing dampers are not recommended with gas logs- failure to open could cause carbon monoxide to back up into the house.
Specifications:- Measures 13" x 13"
- 5/8" Mesh screen
- 11 3/4" Overall height
- Fits inside flue sizes 9" x 9" to 12 1/2" x 12 1/2"
- Stainless steel and cast aluminum construction
- Silicone sealant, sweep's ring, 30' stainless steel cable included
-
Additional Information
Clearance Non-Clearance Country Of Origin United States Fits Lengths From 11 Inch Fits Lengths From 12.5 Inch Fits Lengths From 9.5 Inch Fits Lengths From 9 Inch Fits Lengths From 10.5 Inch Fits Lengths From 11.5 Inch Fits Lengths From 12 Inch Fits Lengths From 10 Inch Fits Widths From 10 Inch Fits Widths From 11 Inch Fits Widths From 11.5 Inch Fits Widths From 9 Inch Fits Widths From 9.5 Inch Fits Widths From 12 Inch Fits Widths From 12.5 Inch Fits Widths From 10.5 Inch Product Type Chimney Caps Pipe Piece Damper Pipe Piece Chimney Cap Mesh 5/8in Mesh Left Overlay Image ets-made-usa-prod.png Additional Information Brand LockTop
The Lock-Top II Chimney Cap/Damper arrives fully assembled and ready to install. The base mounts to a sweep's ring which then is connected to the flue tile with a high temp silicone sealant. A 30' stainless steel cable drops down the flue, and a hardware set mounts in the firebox. The end result is a damper that opens and closes with ease at the tug of a drop down cable. The Lock-Top II is equipped with a fire safety device that enables the damper to remain open in case of a chimney fire.
*Top-sealing dampers are not recommended with gas logs- failure to open could cause carbon monoxide to back up into the house.
Specifications:
- Measures 13" x 13"
- 5/8" Mesh screen
- 11 3/4" Overall height
- Fits inside flue sizes 9" x 9" to 12 1/2" x 12 1/2"
- Stainless steel and cast aluminum construction
- Silicone sealant, sweep's ring, 30' stainless steel cable included
| Clearance | Non-Clearance |
|---|---|
| Country Of Origin | United States |
| Fits Lengths From | 11 Inch |
| Fits Lengths From | 12.5 Inch |
| Fits Lengths From | 9.5 Inch |
| Fits Lengths From | 9 Inch |
| Fits Lengths From | 10.5 Inch |
| Fits Lengths From | 11.5 Inch |
| Fits Lengths From | 12 Inch |
| Fits Lengths From | 10 Inch |
| Fits Widths From | 10 Inch |
| Fits Widths From | 11 Inch |
| Fits Widths From | 11.5 Inch |
| Fits Widths From | 9 Inch |
| Fits Widths From | 9.5 Inch |
| Fits Widths From | 12 Inch |
| Fits Widths From | 12.5 Inch |
| Fits Widths From | 10.5 Inch |
| Product Type | Chimney Caps |
| Pipe Piece | Damper |
| Pipe Piece | Chimney Cap |
| Mesh | 5/8in Mesh |
| Left Overlay Image | ets-made-usa-prod.png |
| Additional Information | |
| Brand | LockTop |
