-
Details
Keep the critters and leaves out of your chimney. This rugged chimney cap is electro statically treated and finished with high temperature paint for added corrosion resistance. Large openings in the spark screen mesh present less draft restriction than smaller mesh common to other caps, optimizing draft and reducing the chance of creosote blockage.
All HY-C caps are completely assembled and feature welded construction. The rain cap simply attaches to the chimney tile liner using four screws. If your chimneys tile liner does not extend up at least 1" then you will also need the HY-C Leg Kit.
- 16 Gauge Wire Mesh
- Black Epoxy Powder Coated Finish
- Heavy 24 Gauge Single Piece Hood
- Made in the USA
Specifications:- Finish: Black Epoxy Powder Coated
- 16 Gauge Wire Mesh
- Heavy 24 Gauge Single Piece Hood
- 20" x 20" Outside Tile Size
- Made in the USA
WARNING: This product can expose you to chemicals including creosotes, which are known to the State of California to cause cancer, and carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.
-
Additional Information
Clearance Non-Clearance Country Of Origin United States Fits Lengths From 18.5 Inch Fits Lengths From 20 Inch Fits Lengths From 19 Inch Fits Lengths From 19.5 Inch Fits Lengths From 20.5 Inch Fits Widths From 19 Inch Fits Widths From 18.5 Inch Fits Widths From 19.5 Inch Fits Widths From 20 Inch Fits Widths From 20.5 Inch Mesh Height 6.5 Inches Product Type Chimney Caps Pipe Piece Chimney Cap Mesh 3/4in Mesh Left Overlay Image Made in America.png Color Black Color Name Black Brand HY-C
Keep the critters and leaves out of your chimney. This rugged chimney cap is electro statically treated and finished with high temperature paint for added corrosion resistance. Large openings in the spark screen mesh present less draft restriction than smaller mesh common to other caps, optimizing draft and reducing the chance of creosote blockage.
All HY-C caps are completely assembled and feature welded construction. The rain cap simply attaches to the chimney tile liner using four screws. If your chimneys tile liner does not extend up at least 1" then you will also need the HY-C Leg Kit.
- 16 Gauge Wire Mesh
- Black Epoxy Powder Coated Finish
- Heavy 24 Gauge Single Piece Hood
- Made in the USA
Specifications:
- Finish: Black Epoxy Powder Coated
- 16 Gauge Wire Mesh
- Heavy 24 Gauge Single Piece Hood
- 20" x 20" Outside Tile Size
- Made in the USA
WARNING:
This product can expose you to chemicals including creosotes, which
are known to the State of California to cause cancer, and
carbon monoxide, which is known to the State of California to cause
birth defects or other reproductive harm.
For more information go to http://www.P65Warnings.ca.gov.
Clearance | Non-Clearance |
---|---|
Country Of Origin | United States |
Fits Lengths From | 18.5 Inch |
Fits Lengths From | 20 Inch |
Fits Lengths From | 19 Inch |
Fits Lengths From | 19.5 Inch |
Fits Lengths From | 20.5 Inch |
Fits Widths From | 19 Inch |
Fits Widths From | 18.5 Inch |
Fits Widths From | 19.5 Inch |
Fits Widths From | 20 Inch |
Fits Widths From | 20.5 Inch |
Mesh Height | 6.5 Inches |
Product Type | Chimney Caps |
Pipe Piece | Chimney Cap |
Mesh | 3/4in Mesh |
Left Overlay Image | Made in America.png |
Color | Black |
Color Name | Black |
Brand | HY-C |