3" PelletVent Pro Adapter Tee with Clean-Out Tee Cap - 3PVP-TAD1

Use for a 90° offset. Attaches directly to appliance as an adapter. Removable twist-lock Clean-Out Tee Cap

PelletVent Pro is a venting system designed for stoves and inserts that use wood pellets and oil fuel. It is also built to vent corn and other bio-fuel products (Rated for continuous use flue temperatures up to 570° F).

See all 3" PelletVent Pro Chimney Components.

Additional Information:

PelletVent Pro is a revolutionary concept for venting both pellet and corn-burning stoves and inserts. As a result of Dura-Vent's cutting edge manufacturing process and commitment to innovation, PelletVent Pro is uncompromised in attention to detail and performance. The precise twist -lock connection requires no gaskets or sealants to achieve leak-resistant connections. PelletVent Pro's perfect fit and finish is made possible with laser-welded stainless steel inner walls and galvalume outer walls which results in a clean, streamline appearance. Today, approximately 3 out of every 4 pellet stoves in the US and Canada are vented with a Dura-Vent pellet system.

  Installation Instructions.

• Diameter: 3"
• Construction materials: Laser welded, double wall pipe with an inner wall of super-ferritic stainless steel and .018" Laser welded galvalume outer wall
• Clearances: 0" Clearance for gas, oil, and pellet applications. 1" Clearance to masonry for wood burning applications. Insulation is required for 0" clearance to masonry for wood burning
• Listings: c-UL Listed to UL641 (MH8381 and MH14420). ULC Listed to ULC S609, ULC/ORD C441 (CMHS609, and CMH1440)

WARNING: This product can expose you to chemicals including Chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.