5" - 8" DuraTech Spark Arrestor - 5DT-SA
DuraTechThis optional Spark Arrestor may be required on some installations. Use on inside of cap.
See all 8" DuraTech Chimney Pipe.
Always check with local code if you are unsure if you need a spark arrestor or not, or if you need a specific size mesh.
Additional Information:
With a Thermal Tech blanket insulation encased between duel walls, DuraTech offers superior safety and performance. It keeps the outer wall cool while ensuring high flue gas temperatures for optimum draft performance. The inner wall is 25% thicker than competitive chimneys, for an extra margin of safety. Designed for normal, continuous operation at 1000?F flue gas temperatures, DuraTech is subjected to rigorous and stringent HT requirements of the UL standard, including one hour at 1400?F, plus three ten minute chimney fire tests at 2100?F.
 Chimney Installation Instructions
 Shroud Installation Instructions
WARNING: This product can expose you to chemicals including Chromium, which is known to the State Of California to cause cancer and birth defects or other reproductive harmFor more information go to http://www.P65Warnings.ca.gov.
Specifications:
- Fits 5"-8" DuraTech Class A and 7"-8" DuraPlus Chimney Caps
- 1/2" x 1/2" Welded Wire
Manufacturer's Limited Lifetime Warranty
- Clearance:
- Non-Clearance
- Country Of Origin:
- United States
- Type:
- Class A Pipe
- Diameter:
- 6 Inch
- Diameter:
- 8 Inch
- Diameter:
- 7 Inch
- Diameter:
- 5 Inch
- Product Type:
- Chimney Pipe
- HR-mail-only:
- true
- _showBulkPricing:
- is-open
- __badge:
- Top Seller
- _Base Price:
- 29.99