6'' DuraTech Finishing Collar with Adapter-6DT-FC

New integrated collar with adapter, fits into the female end of the chimney pipe to provide a decorative black finish. Use on chimney pipe that is suspended with the roof support system or on pipe that is passing through a wall thimble. Provides connection to black DVL or DuraBlack.

• No separate adapter needed
• All in one part, making it less expensive and easier to install
• Drip-free connection
• Screw the pipe to the adapter for a mechanical connection

See all 6" DuraTech Chimney Pipe.

With a Thermal Tech blanket insulation encased between duel walls, DuraTech offers superior safety and performance. It keeps the outer wall cool while ensuring high flue gas temperatures for optimum draft performance. The inner wall is 25% thicker than competitive chimneys, for an extra margin of safety. Designed for normal, continuous operation at 1000 degrees F flue gas temperatures, DuraTech is subjected to rigorous and stringent HT requirements of the UL standard, including one hour at 1400 degrees F, plus three ten minute chimney fire tests at 2100 degrees F.

  Installation Instructions

  Installation Instructions

• Diameter: 6"
• Construction material: Galvalume
• Clearance: 2"
• Listings: Listed to the UL 103 height standard, UL file #MH7399. Listed to the Canadian S610 standard
• Provides a decorative, finished appearance

WARNING: This product can expose you to chemicals including Chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.