8'' DuraTech Cathedral Ceiling Support Kit - DT820-KIT

The 8" DuraTech Cathedral Ceiling Support Kit is a top-rated customer pick and preferred by professional installers.

Included in this 8" DuraTech Kit:

• 8" DuraTech Chimney Cap
• 8" DuraTech Storm Collar
• 8" DuraTech Cathedral Ceiling Support Box
• 8" DuraTech Roof Flashing
• 8" DuraTech Stove PIpe Adapter

Options Available Include.

• 8" DuraTech Spark Arrestor
• 8" DuraTech Extended Roof Bracket

Not Included in this kit.

• 8" DuraBlack, or DVL Black Stove Pipe Lengths
• 8" DuraTech Chimney Pipe Sections Lengths

The 8" DuraTech Cathedral Ceiling Support Kit contains all the components needed to install an 8" chimney (excluding black stove pipe and DuraTech chimney sections) straight up through a cathedral ceiling.

This kit includes the following: (from the cap down)

8" DuraTech Chimney Caps are required where the pipe terminates above the roofline. This DuraTech Chimney Cap is made of stainless steel and designed to twist-lock onto the chimney pipe. Removable screws allow for the cleaning of the chimney and the spark arrestor screen. Shown with optional spark arrestor screen (sold separately).

6" DuraTech Storm Collar are aluminum constructed chimney components that slip around the pipe just above the flashing used in through-the-roof installations. The inner edge of the Storm Collar is sealed to the chimney pipe with a non-hardening 500-degree F high-temperature sealant.

8" DuraTech Square Ceiling Support Boxes are used to support chimney pipe and provide a positive connection between the support box and the chimney pipe with a built-in twist lock feature. This ceiling support is suitable for both flat and cathedral ceiling applications and it can also be used in short attic spaces. Designed for appliances that are tested and listed for use with 2100 Degree F HT chimney systems, such as woodstoves, fireplaces, furnaces, boilers, stoves, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas. This Ceiling support fits between 16" on center joists and most mobile home applications and supports up to 60' of DuraTech Chimney. A 2" wide trim collar is included.

8" DuraTech Roof Flashings are used to weather proof the penetration of chimney pip through the roof. A storm collar is required (not included). Select the proper roof flashing based on the pitch of the roof. For example, a 6/12 pitch has a vertical rise of 6" over a horizontal distance of 12".

8" DuraTech Stove Pipe Adapters are required to connect the stove pipe to the chimney pipe and there are several options to choose from depending on your requirements.

• 

  Slip Connector - Item Number 1871 - Use to connect DuraBlack single wall stove pipe to the ceiling support box. Use the slip connector if you do not have any other adjustable stove pipe length between your stove and support box. This adapter will provide a 3" to 13" slip fitting without having to cut pipe for a perfect fit. Only connects to rigid DuraBlack stove pipe, and cannot be used with telescoping pipe lengths.

• 

  DuraBlack Chimney Adapter - Item Number 8878 - This adapter is recommended to connect DuraBlack single-wall stove pipe to DuraPlus or DuraTech chimney pipe if you do not require adjustability in your stove pipe height. You can also use this adapter to connect DVL double-wall stove pipe to DuraPlus or DuraTech chimney.

• 

  Snap Lock Adapter - Item Number 6891 - Snaps into your ceiling support box or finishing collar and extends down to fit into the stovepipe. Provides a drip-free connection to DuraTech, DuraPlus, DuraPlus HTC chimney pipe, or DuraLiner chimney liner.

• 

  DVL Adapter - Item Number 8875 - Use to connect from double-wall DVL to DuraTech, DuraPlus, DuraPlus HTC, and DuraLiner for a through-the-wall or ceiling support installation. Required for proper connection. Provides a strong mechanical connection. Painted black.

Optional extended roof bracket is required when your chimney extends more than 4' above the roof. It will provide stability to the chimney against wind and snow

• .020'' 430 stainless steel inner wall
• .016'' 430 stainless steel or .021'' galvalume steel outer wall options
• Thermal Tech (ceramic refractory) blanket insulation encased between walls
• Stainless steel end rings to seal the pipe
• Light weight insulation, twist-lock fittings, support boxes with factory installed starter sections

WARNING: This product can expose you to chemicals including Chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.