null

Menu

8'' Shasta Vent Thru the Ceiling Kit

Cathedral Ceiling Support Kit includes Support Box, Insulation Shield, Cap and Storm Collar
SKU: BNDL_NLE5VS_SV820
MPN: BNDL_NLE5VS_SV820
$1,200.49
$410.00


(No reviews yet) Write a Review
RECOMMENDED USES

    The 8" ShastaVent Cathedral Ceiling Support Kit contains all the components needed to install a 8" chimney (excluding black stove pipe and ShastaVent chimney sections) straight up through a cathedral ceiling.

In Stock: Available
$1,200.49
$410.00
  • Details

    The 8" ShastaVent Thru the Ceiling Kit contains all the components needed to install a 8" chimney (excluding black stove pipe and ShastaVent chimney sections) straight up through a cathedral ceiling.

    Materials and Construction

    • 304 stainless steel inner wall
    • 304 stainless steel steel outer wall
    • High Temperature Ceramic blanket insulation encased between walls
    • Stainless steel end rings to seal the pipe
    • Light weight insulation, twist-lock fittings, support boxes with factory installed starter sections
    This kit includes the following: (from the cap down)

     height=

    8" Shasta Vent Deluxe Chimney Cap - The Chimney Cap tops off the chimney system, helps to retain sparks and embers, and protects the chimney opening from infiltration of weather, debris, and animals. The Deluxe Cap features a removable spark arrestor screen. This Shasta Vent Deluxe Chimney Cap is made of stainless steel and designed to twist-lock on to the chimney pipe. .

    8" Shasta Vent Storm CollarThe Storm Collar works together with the Flashing to provide a weatherproof seal where the chimney penetrates through the roof. The Storm Collar is installed directly above the Flashing and must be sealed to the chimney using high-temperature silicone sealant (RTV 500 Degrees F or better).

    8" Shasta Vent Roof FlashingThe Flashing provides a weather resistant means of sealing the chimney system where it passes through the roof.

    8" Shasta Vent Ceiling Support BoxThe Shasta Vent 24" Tall Support Box works with ceiling pitch to 18/12 pitch (57 degrees). The Ceiling Support Box supports the chimney installation and provides a transition from the stove pipe to the chimney. The Ceiling Support Box can support a maximum of 50-ft of chimney pipe. For a taller system, a Tee Support can be added to help support the additional weight.

    Optional extended roof bracket is required when your chimney extends more than 5' above the roof. It will provide stability to the chimney against wind and snow

    Simply add enough 8" stove pipe and Shasta Vent Class A chimney pipe to complete your installation.


    Specifications:

    Chimney Cap

    • Diameter: 8''
    • Construction Material: .020'' type 304 Stainless Steel inner and outer walls
    • Clearance: 2" clearance to combustibles
    • Listings: ETL Listed by Intertek to the HT requirements of UL 103
    • Twist-lock joints for ease of assembly and Locking Bands for security, High-Temperature, thin-fiber ceramic insulation blanket maintains superior draft performance
    • Tested to 1000 Degrees F continuously, 1400 Degrees F for 1-hour, and 3x 2100 Degrees F for 10-minutes as would be encountered in a creosote fire

    Storm Collar

    • Diameter: 8''
    • Construction Material: .020'' type 304 Stainless Steel inner and outer walls
    • Clearance: 2" clearance to combustibles
    • Listings: ETL Listed by Intertek to the HT requirements of UL 103
    • Tested to 1000 Degrees F continuously, 1400 Degrees F for 1-hour, and 3x 2100 Degrees F for 10-minutes as would be encountered in a creosote fire

    Support Box

    • Diameter: 8''
    • 24" Tall Box: Up to 16/12 ceiling pitch (53 degrees)
    • Construction Material: .020'' type 304 Stainless Steel inner and outer walls
    • Clearance: 2" clearance to combustibles
    • Listings: ETL Listed by Intertek to the HT requirements of UL 103
    • Tested to 1000 Degrees F continuously, 1400 Degrees F for 1-hour, and 3x 2100 Degrees F for 10-minutes as would be encountered in a creosote fire

    Flashing

    • Diameter: 8''
    • Construction Material: .020'' type 304 Stainless Steel inner and outer walls
    • Clearance: 2" clearance to combustibles
    • Listings: ETL Listed by Intertek to the HT requirements of UL 103
    • Tested to 1000 Degrees F continuously, 1400 Degrees F for 1-hour, and 3x 2100 Degrees F for 10-minutes as would be encountered in a creosote fire
  • Additional Information
    Clearance Non-Clearance
    Country Of Origin United States
    Pipe Wall Double Wall
    Product Type Chimney Kits
    Diameter 8 Inch
    Brand Shasta Vent

The 8" ShastaVent Thru the Ceiling Kit contains all the components needed to install a 8" chimney (excluding black stove pipe and ShastaVent chimney sections) straight up through a cathedral ceiling.

Materials and Construction

  • 304 stainless steel inner wall
  • 304 stainless steel steel outer wall
  • High Temperature Ceramic blanket insulation encased between walls
  • Stainless steel end rings to seal the pipe
  • Light weight insulation, twist-lock fittings, support boxes with factory installed starter sections
This kit includes the following: (from the cap down)

 height=

8" Shasta Vent Deluxe Chimney Cap - The Chimney Cap tops off the chimney system, helps to retain sparks and embers, and protects the chimney opening from infiltration of weather, debris, and animals. The Deluxe Cap features a removable spark arrestor screen. This Shasta Vent Deluxe Chimney Cap is made of stainless steel and designed to twist-lock on to the chimney pipe. .

8" Shasta Vent Storm CollarThe Storm Collar works together with the Flashing to provide a weatherproof seal where the chimney penetrates through the roof. The Storm Collar is installed directly above the Flashing and must be sealed to the chimney using high-temperature silicone sealant (RTV 500 Degrees F or better).

8" Shasta Vent Roof FlashingThe Flashing provides a weather resistant means of sealing the chimney system where it passes through the roof.

8" Shasta Vent Ceiling Support BoxThe Shasta Vent 24" Tall Support Box works with ceiling pitch to 18/12 pitch (57 degrees). The Ceiling Support Box supports the chimney installation and provides a transition from the stove pipe to the chimney. The Ceiling Support Box can support a maximum of 50-ft of chimney pipe. For a taller system, a Tee Support can be added to help support the additional weight.

Optional extended roof bracket is required when your chimney extends more than 5' above the roof. It will provide stability to the chimney against wind and snow

Simply add enough 8" stove pipe and Shasta Vent Class A chimney pipe to complete your installation.


Specifications:

Chimney Cap

  • Diameter: 8''
  • Construction Material: .020'' type 304 Stainless Steel inner and outer walls
  • Clearance: 2" clearance to combustibles
  • Listings: ETL Listed by Intertek to the HT requirements of UL 103
  • Twist-lock joints for ease of assembly and Locking Bands for security, High-Temperature, thin-fiber ceramic insulation blanket maintains superior draft performance
  • Tested to 1000 Degrees F continuously, 1400 Degrees F for 1-hour, and 3x 2100 Degrees F for 10-minutes as would be encountered in a creosote fire

Storm Collar

  • Diameter: 8''
  • Construction Material: .020'' type 304 Stainless Steel inner and outer walls
  • Clearance: 2" clearance to combustibles
  • Listings: ETL Listed by Intertek to the HT requirements of UL 103
  • Tested to 1000 Degrees F continuously, 1400 Degrees F for 1-hour, and 3x 2100 Degrees F for 10-minutes as would be encountered in a creosote fire

Support Box

  • Diameter: 8''
  • 24" Tall Box: Up to 16/12 ceiling pitch (53 degrees)
  • Construction Material: .020'' type 304 Stainless Steel inner and outer walls
  • Clearance: 2" clearance to combustibles
  • Listings: ETL Listed by Intertek to the HT requirements of UL 103
  • Tested to 1000 Degrees F continuously, 1400 Degrees F for 1-hour, and 3x 2100 Degrees F for 10-minutes as would be encountered in a creosote fire

Flashing

  • Diameter: 8''
  • Construction Material: .020'' type 304 Stainless Steel inner and outer walls
  • Clearance: 2" clearance to combustibles
  • Listings: ETL Listed by Intertek to the HT requirements of UL 103
  • Tested to 1000 Degrees F continuously, 1400 Degrees F for 1-hour, and 3x 2100 Degrees F for 10-minutes as would be encountered in a creosote fire
Clearance Non-Clearance
Country Of Origin United States
Pipe Wall Double Wall
Product Type Chimney Kits
Diameter 8 Inch
Brand Shasta Vent

SPECIAL OFFER