8''x8'' Lock-Top II Chimney Cap-Damper 3/4'' Mesh

New Lock-Top II 8" x 8" Chimney Cap/Damper - This premier energy-saving product is 90% more efficient than a traditional throat damper. With today's skyrocketing energy costs, the dollars saved in heat loss make a cap/damper combination a better choice than a chimney cap alone. The energy savings will quickly pay for the installation.

The Lock-Top II Chimney Cap/Damper arrives fully assembled and ready to install. Its base mounts to the sweep's ring which connects to the flue tile with silicone sealant. A 30' stainless steel cable drops down the flue, and a hardware set mounts in the firebox. The end result is a damper that opens and closes with ease at the tug of a drop down cable. The Lock-Top II is equipped with a fire safety device that enables the damper to remain open in case of a chimney fire.

*Top-sealing dampers are not recommended with gas logs- failure to open could cause carbon monoxide to back up into the house.

• Measures 8" x 8"
• 3/4" mesh screen
• 11 3/8" Overall height
• 49 sq. in. cross-sectional area
• Fits inside flue sizes 6" x 6" to 9" x 9"
• 30' Stainless steel cable included
• Silicone sealant included
• Sweep's ring included

• Measures 8" x 8"
• 3/4" Mesh screen
• 11 3/4" Overall height
• Fits inside flue sizes 6" x 6" to 9" x 9"
• Stainless steel and cast aluminum construction
• Silicone sealant, sweep's ring, 30' stainless steel cable included