SS-1 Stovestat Wood Stove Blower Thermostat

The Stove Stat operates as a thermostat, eliminating the need to manually control stove blowers. A heat sensor magnetically connects on the outer stove wall near the blower. When the sensor reaches a temperature of 110° F, the blower is automatically started. The blower is turned off as surface temperatures near 90° F. This operation prevents the blower from functioning when the stove is not producing heat.

Stove Stats are also useful where a switch is required to cycle the circulator used in distributing the hot water from a stove water jacket to a tank or hot water heating system. It installs in seconds, simply place the magnetic head near the woodstove blower, plug the blower into the Stove Stat and plug into any standard 110 outlet.

Note: This item is only for use with double wall air circulating stoves.

• Rated 4.4 amps at 115 volt, 2.2 amps at 230 volt
• To be used only on double wall stoves. Cannot be used on single wall stoves.
• Blower will start automatically when the stove heat exchanger reaches approx. 110° F
• The blower will turn off when it reaches approx. 90° F

The Stove Stat operates as a thermostat, eliminating the need to manually control stove blowers. A heat sensor magnetically attaches on the outer stove wall near the blower. When the sensor reaches a temperature of 110° F, the blower is automatically started. The blower is turned off as surface temperatures near 90 degrees F. This operation prevents the blower from functioning when the stove is not producing heat.