6" SuperPro Decorator Ceiling Support with Trim

6" SuperPro Decorator Ceiling Support - Made of cold-rolled steel painted black, the decorator ceiling support with matte-black finish and black trim, is what you use for flat ceiling support installations. Install it between ceiling joists, using headers to create a framework. Be sure the finishing plate is flush with the underside of the ceiling and the assembly is level and plumb. Nail or screw the decorator ceiling support to your framing through the 12 pre-drilled holes. Use 2" nails or screws, not included. When properly installed, the decorator ceiling support will hold up to 50' of chimney.

See all 6" Selkirk SuperPro Components.

Additional Information:

SuperPro is safety tested and listed to applicable UL/ULC standards.  These include USA: UL 103-HT safety standards for chimneys serving solid fuel and liquid fuel appliances.  This chimney system has been designed for use on wood stoves, fireplaces, and residential furnaces in the U.S. market.

Allowable flue gas temperatures are as follows:

• Maximum continuous: 1000 Degree F / 500 Degree C
• Brief forced firing: 1400 Degree F / 760 Degree C
• Creosote burn out: 2100 Degree F / 1150 Degree C

  Installation Planning Guide

  Installation Instructions

Specifications:

• Diameter: 6"
• Construction materials: Galvalume
• Clearances: 2" to combustibles
• Listings: Safety tested and listed to applicable UL/ULC standards USA: UL 103 HT
• Trim Outer Diameter: 17 7/8"
• Top Outer Diameter: 12 3/8"
• Bottom Outer Diameter: 8 1/4"
• Overall Height: 8"