Simpson DuraPlus HTC Chimney System - All-Fuel Chimney for Canada
DuraPlus is a triple-wall, 2100° HT (high temp) all-fuel chimney system designed for appliances that require a UL 103 HT chimney system, such as wood stoves, fireplaces, furnaces, boilers, stoves, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas, and zero clearance fireplaces that are factory-built. This triple-wall pipe features two insulating layers (ceramic blanket, plus air space). The ceramic blanket insulation is held securely in position, eliminating hot spots common with loose-fill type insulations. In the event of a creosote fire, the compressible blanket insulation permits the chimney liner to expand outwardly in a radial direction. Locks tightly with a precision twist-lock connection. Simpson DuraPlus carries a limited-lifetime warranty.
Typical Installations
Using the Typical Venting Installation drawings, select the appropriate component parts for your installation.
DVL/DuraBlack Chimney Adapter or DuraBlack Slip Connector must be used when connecting DVL or DuraBlack stovepipe to a Ceiling Support, Wall Thimble, or Finishing Collar.
A Snap-Lock Adapter must be used when attaching snap-lock stovepipe to DuraPlus.
Wall Thimble must be installed with an appropriate section of chimney pipe for all horizontal through-the-wall installations. To accommodate thicker walls a wall thimble extension can be field fabricated.
Attic Insulation Shield must be used in all installations that pass through an attic, regardless of whether the attic is insulated or not. If chimney is enclosed in a chase in the attic space, an Attic Insulation Shield is not required.
Firestop Radiation Shield must be used when a chimney passes through a floor or ceiling without a Ceiling Support Box.
Multi Story
Cathedral Ceiling
Oil Furnace
Attic Offset
Through-The-Wall
Installation Key
| 1 | DuraPlus Htc Chimney Pipe | 11 | Round Ceiling Support |
| 2 | Elbow | 12 | Square Ceiling Support Box |
| 3 | Elbow Strap | 13 | Roof Support |
| 4 | Tee | 14 | Roof Support Trim Collar |
| 5 | Wall Thimble | 15 | Roof Flashing |
| 6 | Tee Support Bracket | 16 | Fire Stop Radiation Shield |
| 7 | DVL-Durablack Chimney Adapter | 17 | Roof Radiation Shield |
| 8 | Chimney Cap | 18 | Attic Insulation Shield |
| 9 | Storm Collar | ||
| 10 | Finishing collar | 19 | DVL or DuraBlack Stove Pipe |
| 20 | Stovepipe Adapter | 21 | DVL or DuraBlack Tee |
| 22 | DVL or DuraBlack Elbow |
Be fire-safe!
Maintain at least a minimum 2" clearance (air space) to combustibles. Use proper support and bracing. Follow local building codes and have your chimney inspected by a certified professional.
Measure the diameter of the appliance flue outlet. Select the chimney and either DVL or DuraBlack connector stovepipe with the same size diameter as the appliance flue outlet. For fireplace installations, refer to the sizing chart in the back of the DuraTech section of this catalog.
Determine if the installation is a through-the-roof installation or a through-the-wall installation. A through-the-wall installation will require additional components (Wall Thimble, Tee w/ Cap, Tee Support, and Wall Straps).
Install the chimney in the interior of the structure whenever possible. A cold exterior chimney will produce less draft and will generate more creosote.
If possible, avoid offsets that serve to restrict the natural draft.
Determine the minimum chimney height above the roof line. Check your local building codes for proper installation.