null

Menu

Shasta Vent 6 Inch Ventilated Roof Flashing - 12 Pitch

Shasta Vent 6 Inch Ventilated Roof Flashing - 12 Pitch
SKU: NLE5VS_6A_VRF12
MPN: 6A-VRF12
$127.33
$119.00


(No reviews yet) Write a Review
RECOMMENDED USES
    • Ventilated Flashing
    • Fits 7/12-12/12 Roof Pitches
    • Cone Dimensions: 9'' ID x 7 1/2'' High
    • Base Dimensions: 23'' Wide x 28" Length
    • Construction Material: Galvanized Steel
    • Listings: ETL Listed by Intertek to the HT requirements of UL 103
In Stock
$127.33
$119.00
  • Details
    The Flashing provides a weather resistant means of sealing the chimney system where it passes through the roof. Flashings are available as either Non-Ventilated or Ventilated. A Ventilated Flashing is required when the chimney is installed in an unventilated chase enclosure or is fully enclosed through the attic.
    Additional Information:

    Shasta Vent All-Fuel HT Chimney is a double wall, solid-filled residential chimney featuring .020" type 304 Stainless Steel inner and outer walls with a 2" clearance to combustibles. All-Fuel HT Chimney also features precision engineered twist-lock end rings and quick and easy Locking Bands. The high-temperature ceramic blanket insulation is encased between the stainless steel walls of the pipe sections to maintain a strong draft, while maintaining a relatively cooler temperature on the exterior wall. In installations where offsets are required up to four 30 Degree elbows, each capable of rotating 360 Degrees, can be used in the system. The Shasta Vent All-Fuel HT Chimney is ETL Listed by Intertek to the HT requirements of UL 103. Tested to 1000 Degrees F continuously, 1400 Degrees F for 1-hour, and 3x 2100 Degrees F for 10-minutes as would be encountered in a creosote fire


      ShastaVent Catalog

      Installation Instructions


    Specifications:
    • Ventilated Flashing
    • Fits 7/12-12/12 Roof Pitches
    • Cone Dimensions: 9'' ID x 7 1/2'' High
    • Base Dimensions: 23'' Wide x 28" Long
    • Construction Material: Galvanized Steel
    • Listings: ETL Listed by Intertek to the HT requirements of UL 103
  • Additional Information
    Clearance Non-Clearance
    Country Of Origin China
    Pipe Piece Flashing
    Type Class A Pipe
    Diameter 6 Inch
    Product Type Chimney Pipe
    Brand Shasta Vent
The Flashing provides a weather resistant means of sealing the chimney system where it passes through the roof. Flashings are available as either Non-Ventilated or Ventilated. A Ventilated Flashing is required when the chimney is installed in an unventilated chase enclosure or is fully enclosed through the attic.
Additional Information:

Shasta Vent All-Fuel HT Chimney is a double wall, solid-filled residential chimney featuring .020" type 304 Stainless Steel inner and outer walls with a 2" clearance to combustibles. All-Fuel HT Chimney also features precision engineered twist-lock end rings and quick and easy Locking Bands. The high-temperature ceramic blanket insulation is encased between the stainless steel walls of the pipe sections to maintain a strong draft, while maintaining a relatively cooler temperature on the exterior wall. In installations where offsets are required up to four 30 Degree elbows, each capable of rotating 360 Degrees, can be used in the system. The Shasta Vent All-Fuel HT Chimney is ETL Listed by Intertek to the HT requirements of UL 103. Tested to 1000 Degrees F continuously, 1400 Degrees F for 1-hour, and 3x 2100 Degrees F for 10-minutes as would be encountered in a creosote fire


  ShastaVent Catalog

  Installation Instructions


Specifications:
  • Ventilated Flashing
  • Fits 7/12-12/12 Roof Pitches
  • Cone Dimensions: 9'' ID x 7 1/2'' High
  • Base Dimensions: 23'' Wide x 28" Long
  • Construction Material: Galvanized Steel
  • Listings: ETL Listed by Intertek to the HT requirements of UL 103
Clearance Non-Clearance
Country Of Origin China
Pipe Piece Flashing
Type Class A Pipe
Diameter 6 Inch
Product Type Chimney Pipe
Brand Shasta Vent

SPECIAL OFFER