null Shasta Vent 6 Inch Ventilated Roof Flashing - Flat

Menu

Shasta Vent 6 Inch Ventilated Roof Flashing - Flat

Shasta Vent 6 Inch Ventilated Roof Flashing - Flat
SKU: NLE5VS_6A_VRF0
MPN: 6A-VRF0
$127.66
$119.00


(1 review) Write a Review
RECOMMENDED USES
    • Ventilated Flashing
    • Fits Flat Roof Pitches
    • Construction Material: Galvanized Steel
    • Dimensions: 9'' ID x 26'' Sq. Base x 15'' High
    • Listings: ETL Listed by Intertek to the HT requirements of UL 103
In Stock
$127.66
$119.00
  • Details
    The Flashing provides a weather resistant means of sealing the chimney system where it passes through the roof. Flashings are available as either Non-Ventilated or Ventilated. A Ventilated Flashing is required when the chimney is installed in an unventilated chase enclosure or is fully enclosed through the attic.
    Additional Information:

    Shasta Vent All-Fuel HT Chimney is a double wall, solid-filled residential chimney featuring .020" type 304 Stainless Steel inner and outer walls with a 2" clearance to combustibles. All-Fuel HT Chimney also features precision engineered twist-lock end rings and quick and easy Locking Bands. The high-temperature ceramic blanket insulation is encased between the stainless steel walls of the pipe sections to maintain a strong draft, while maintaining a relatively cooler temperature on the exterior wall. In installations where offsets are required up to four 30 Degree elbows, each capable of rotating 360 Degrees, can be used in the system. The Shasta Vent All-Fuel HT Chimney is ETL Listed by Intertek to the HT requirements of UL 103. Tested to 1000 Degrees F continuously, 1400 Degrees F for 1-hour, and 3x 2100 Degrees F for 10-minutes as would be encountered in a creosote fire


      ShastaVent Catalog

      Installation Instructions


    Specifications:
    • Ventilated Flashing
    • Fits Flat Roof Pitches
    • Construction Material: Galvanized Steel
    • Dimensions: 9'' ID x 26'' Sq. Base x 15'' High
    • Listings: ETL Listed by Intertek to the HT requirements of UL 103
  • Additional Information
    Clearance Non-Clearance
    Country Of Origin China
    Pipe Wall Double Wall
    Pipe Piece Flashing
    Type Class A Pipe
    Diameter 6 Inch
    Product Type Chimney Pipe
    Brand Shasta Vent
  • 1 Review

    1 Review

    • 2
      6 inch roof flashing for flat roof

      Posted by Pete Sundt on Dec 15th 2020

      The flashing I received was far too large in diameter for a 6 inch pipe. Either I was shipped the wrong item or it doesn't fit 6 inch. I ended up using 8 inch and it was still loose. Same for the storm collar!

The Flashing provides a weather resistant means of sealing the chimney system where it passes through the roof. Flashings are available as either Non-Ventilated or Ventilated. A Ventilated Flashing is required when the chimney is installed in an unventilated chase enclosure or is fully enclosed through the attic.
Additional Information:

Shasta Vent All-Fuel HT Chimney is a double wall, solid-filled residential chimney featuring .020" type 304 Stainless Steel inner and outer walls with a 2" clearance to combustibles. All-Fuel HT Chimney also features precision engineered twist-lock end rings and quick and easy Locking Bands. The high-temperature ceramic blanket insulation is encased between the stainless steel walls of the pipe sections to maintain a strong draft, while maintaining a relatively cooler temperature on the exterior wall. In installations where offsets are required up to four 30 Degree elbows, each capable of rotating 360 Degrees, can be used in the system. The Shasta Vent All-Fuel HT Chimney is ETL Listed by Intertek to the HT requirements of UL 103. Tested to 1000 Degrees F continuously, 1400 Degrees F for 1-hour, and 3x 2100 Degrees F for 10-minutes as would be encountered in a creosote fire


  ShastaVent Catalog

  Installation Instructions


Specifications:
  • Ventilated Flashing
  • Fits Flat Roof Pitches
  • Construction Material: Galvanized Steel
  • Dimensions: 9'' ID x 26'' Sq. Base x 15'' High
  • Listings: ETL Listed by Intertek to the HT requirements of UL 103
Clearance Non-Clearance
Country Of Origin China
Pipe Wall Double Wall
Pipe Piece Flashing
Type Class A Pipe
Diameter 6 Inch
Product Type Chimney Pipe
Brand Shasta Vent

1 Review

  • 2
    6 inch roof flashing for flat roof

    Posted by Pete Sundt on Dec 15th 2020

    The flashing I received was far too large in diameter for a 6 inch pipe. Either I was shipped the wrong item or it doesn't fit 6 inch. I ended up using 8 inch and it was still loose. Same for the storm collar!

SPECIAL OFFER