null

Save 10% on Stove Pipe. Shop Now!

Shasta Vent Adjustable Chimney Pipe 8 Inch x 11 - 20 Inches

Shasta Vent
SKU:
NLE5VS_8A_18A
|
UPC:
855644005290
Availability:
Out of Stock: Back in Stock 06/01/2024
$234.00
Low Stock!
Available

Out of stock

Out of Stock
The Adjustable Chimney Pipe is offered when standard lengths of chimney will not fit for your installation, and can be used to achieve specific offset distances for the chimney. This section of pipe may also be used for through the wall applications. The Adjustable Chimney Pipe comes as two sections which slide over one another and compresses down to the necessary size. The Adjustable Chimney Pipe adjusts from approximately 11 to 20 inches. The included blanket of insulation will need to be customized to the length needed for the Adjustable Chimney Pipe. .

Additional Information:

Shasta Vent All-Fuel HT Chimney is a double wall, solid-filled residential chimney featuring .020" type 304 Stainless Steel inner and outer walls with a 2" clearance to combustibles. All-Fuel HT Chimney also features precision engineered twist-lock end rings and quick and easy Locking Bands. The high-temperature ceramic blanket insulation is encased between the stainless steel walls of the pipe sections to maintain a strong draft, while maintaining a relatively cooler temperature on the exterior wall. In installations where offsets are required up to four 30 Degree elbows, each capable of rotating 360 Degrees, can be used in the system. The Shasta Vent All-Fuel HT Chimney is ETL Listed by Intertek to the HT requirements of UL 103. Tested to 1000 Degrees F continuously, 1400 Degrees F for 1-hour, and 3x 2100 Degrees F for 10-minutes as would be encountered in a creosote fire


Adobe PDF Icon  ShastaVent Catalog

Adobe PDF File Icon  Installation Instructions


Specifications:
  • Clearance: 2" clearance to combustibles
  • Dimensions: 8'' ID x 10'' OD x 11-20'' Adjustable Length
  • Listings: ETL Listed by Intertek to the HT requirements of UL 103
  • Twist-lock joints for ease of assembly and Locking Bands for security
  • Construction Material: .020'' type 304 Stainless Steel inner and outer walls
  • High-Temperature, thin-fiber ceramic insulation blanket maintains superior draft performance
  • Clearance: 2" clearance to combustibles
  • Dimensions: 8'' ID x 10'' OD x 11-20'' Adjustable Length
  • Listings: ETL Listed by Intertek to the HT requirements of UL 103
  • Twist-lock joints for ease of assembly and Locking Bands for security
  • Construction Material: .020'' type 304 Stainless Steel inner and outer walls
  • High-Temperature, thin-fiber ceramic insulation blanket maintains superior draft performance
LIMITED LIFETIME WARRANTY Shasta Vent Inc (Shasta Vent) provides this limited lifetime warranty for all of its products. Subject to the limitations set forth below, Shasta Vent warrants that its products will be free from defects in material or manufacturing, if properly installed, maintained and used. Shasta Vent products are fully warranted if installed only by a professional installer (see below for definition). This Warranty is not transferable from the original homeowner. This warranty does not cover normal wear and tear, smoke damage or damage caused by chimney fires, acts of God, or any product that was: (1) modified or altered; (2) improperly serviced, inspected or cleaned; or (3) subject to negligence or any use not in accordance with the installation instructions included with the product as determined by Shasta Vent.

Warranty Information Adobe PDF File Icon  Manufacturer's Limited Lifetime Warranty


Width:
11.00 (in)
Height:
11.00 (in)
Depth:
13.00 (in)
_PDF:
SV-All-Fuel-HT-Chimney-Installation-Instructions|pdf|Shasta Vent Installation Instructions
Clearance:
Non-Clearance
Country Of Origin:
China
Pipe Wall:
Double Wall
Pipe Piece:
Chimney Pipe
Type:
Class A Pipe
Diameter:
8 Inch
Size:
18in
Product Type:
Chimney Pipe
_Base Price:
234
HR-mail-only:
true

You May Also Like


People Also Bought